Garland E24 series Installation Manual

E22 series; e24 series; e18 series; e20 series electric units

Advertisement

E22, E24, E18 & E20 SERIES ELECTRIC UNITS
FOR YOUR SAFETY:
DO NOT STORE OR USE GASOLINE
OR OTHER FLAMMABLE VAPORS OR
LIQUIDS IN THE VICINITY OF
THIS OR ANY OTHER
IMPROPER INSTALLATION, ADJUSTMENT,
ALTERATION, SERVICE OR MAINTENANCE
CAN CAUSE PROPERTY DAMAGE, INJURY,
OR DEATH. READ THE INSTALLATION,
OPERATING AND MAINTENANCE
INSTRUCTIONS THOROUGHLY
BEFORE INSTALLING OR
SERVICING THIS EQUIPMENT
Users are cautioned that maintenance and repairs must be performed by a Garland authorized service agent
using genuine Garland replacement parts. Garland will have no obligation with respect to any product that has been
improperly installed, adjusted, operated or not maintained in accordance with national and local codes or installation
instructions provided with the product, or any product that has its serial number defaced, obliterated or removed,
or which has been modified or repaired using unauthorized parts or by unauthorized service agents.
For a list of authorized service agents, please refer to the Garland web site at http://www.garland-group.com.
The information contained herein, (including design and parts specifications), may be superseded and is subject
to change without notice.
GARLAND COMMERCIAL INDUSTRIES
185 East South Street
Freeland, Pennsylvania 18224
Phone: (570) 636-1000
Fax: (570) 636-3903
Part # P66 (01/25/08)
Part # P66 (01/25/08)

INSTALLATION MANUAL

APPLIANCE
WARNING:
GARLAND COMMERCIAL RANGES, LTD.
1177 Kamato Road, Mississauga, Ontario L4W 1X4
CANADA
Phone: 905-624-0260
Fax: 905-624-5669
PLEASE READ ALL SECTIONS OF THIS MANUAL
AND RETAIN FOR FUTURE REFERENCE.
THIS PRODUCT HAS BEEN CERTIFIED AS
COMMERCIAL COOKING EQUIPMENT AND
MUST BE INSTALLED BY PROFESSIONAL
PERSONNEL AS SPECIFIED.
INSTALLATION AND ELECTRICAL CONNECTION
MUST COMPLY WITH CURRENT CODES:
IN CANADA - THE CANADIAN ELECTRICAL
CODE PART 1 AND / OR LOCAL CODES.
IN USA – THE NATIONAL ELECTRICAL CODE
ANSI / NFPA – CURRENT EDITION.
ENSURE ELECTRICAL SUPPLY CONFORMS WITH
ELECTRICAL CHARACTERISTICS SHOWN ON
THE RATING PLATE.
Enodis UK LTD.
Swallowfield Way, Hayes, Middlesex UB3 1DQ ENGLAND
Telephone: 081-561-0433
Fax: 081-848-0041
© 2006 Garland Commercial Industries, Inc.
Page 1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the E24 series and is the answer not in the manual?

Questions and answers

Summarization of Contents

Important Information
Product Safety Warnings
Contains warnings regarding product chemicals and potential exposure to glass wool/ceramic fibers during installation and servicing.
General Information
Uncrating and Unit Preparation
Instructions for safely removing units from packaging and removing protective materials.
Compliance with Electrical Codes
Guidance on adhering to Canadian and US electrical codes for proper installation.
Rating Plate Utilization
Ensuring electrical supply matches the characteristics specified on the unit's rating plate.
Installation Procedures
E22 Series Banking Plate Installation
Steps to install banking plates for joining E22/G22 units, ensuring a secure and aligned fit.
E24 Series Banking Plate Installation
Steps to install banking plates for joining E24/G24 units, ensuring a secure and aligned fit.
CS22 Counter Stand Assembly and Installation
Guide for assembling, leveling, and securing the CS22 counter stand for equipment placement.
CS24 Counter Stand Assembly and Installation
Guide for assembling, leveling, and securing the CS24 counter stand for equipment placement.
Fryer Model E22-14F & E22-28FT Installation
Specific installation instructions for E22 fryers, covering serial plate, clearances, electrical, and initial operation.
Hot Plate Model E22-12H Installation
Installation details for E22-12H hot plate: serial plate, wall clearances, electrical connections, and controls.
Griddles Model E22-18G, E22-24G, E22-36G Installation
Installation instructions for E22 series griddles, including serial plate, wall clearances, and electrical connections.
Griddle Thermostats Calibration
Procedure for calibrating snap-action griddle thermostats, ensuring accurate temperature control.
Sandwich Griddle Model E22-18SG Installation
Installation guide for E22-18SG sandwich griddle: serial plate, wall clearances, electrical, and controls.
Food Warmers Model E22-15W, E22-15WP, E24-32W, E24-32WP Installation
Installation details for E22/E24 food warmers: serial plate, wall clearances, and electrical connections.
Pizza Ovens Model E22-22P & E22-22PP Installation
Installation guide for E22 pizza ovens: serial plate, wall clearances, and electrical supply requirements.
Pizza Oven Thermostat Calibration
Instructions for calibrating pizza oven thermostats for precise temperature settings.
Broilers Model E22-12B, E22-24B, E22-36B Installation
Installation guide for E22 broilers: serial plate, wall clearances, electrical connections, and controls.
Hot Plate Model E24-12H Installation
Installation guide for E24-12H hot plate: serial plate, wall clearances, electrical connections, and controls.
Fryers Model E24-31F, E24-31SF, E24-31FBL, E24-31SFBL, E18F, E18SF, E18FBL & E18SFBL Installation
Installation for E24/E18 fryers: serial plate, wall clearances, and electrical connection details.
Griddles Model E24-24G, E24-36G, E24-48G, E24-60G, E24-72G Installation
Installation for larger E24 griddles: serial plate, wall clearances, and electrical connection details.
Griddle Thermostat Calibration
Procedure for recalibrating griddle thermostats to maintain accurate cooking temperatures.
Stock Pots Ranges Model E20-SP & E20-SPC Installation
Installation guide for E20 stock pot ranges: serial plate, wall clearances, electrical connections, and controls.

Table of Contents