Advertisement

Models:
WARNING
IF THE INFORMATION IN
THESE INSTRUCTIONS IS
NOT FOLLOWED EXACTLY, A
FIRE OR EXPLOSION MAY
RESULT CAUSING PROPERTY
DAMAGE, PERSONAL INJURY,
OR LOSS OF LIFE.
- Do not store or use gasoline or other flam-
mable vapors and liquids in the vicinity of this
or any other appliance.
- What to do if you smell gas
• Do not try to light any appliance.
• Do not touch any electrical switch.
• Do not use any phone in your building.
• Immediately call your gas supplier from a
neighbor's phone. Follow the gas supplier's
instructions.
• If you cannot reach your gas supplier, call the
fire department.
- Installation and service must be performed by a
qualified installer, service agency, or the gas
supplier.
Printed in U.S.A.
Copyright 1997,
Heat-N-Glo Fireplace Products, Inc.
6665 West Highway 13, Savage, MN 55378
READ THIS MANUAL BEFORE INSTALLING
OR OPERATING THIS APPLIANCE. THIS
INSTALLERS GUIDE MUST BE LEFT WITH
APPLIANCE FOR FUTURE REFERENCE.
WARNING: IMPROPER
INSTALLATION, ADJUSTMENT,
ALTERATION, SERVICE OR
MAINTENANCE CAN CAUSE
INJURY OR PROPERTY DAMAGE.
REFER TO THIS MANUAL. FOR
ASSISTANCE OR ADDITIONAL
INFORMATION CONSULT A
QUALIFIED INSTALLER, SERVICE
AGENGY, OR THE GAS SUPPLIER.
This appliance may be installed in an
1.
aftermarket, permanently located,
manufactured (mobile) home, where
not prohibited by local codes.
2. This appliance is only for use with the
type of gas indicated on the rating
plate. This appliance is not convertible
for use with other gases, unless a
certified kit is used.
Please contact your Heat-N-Glo Fireplace
dealer for any questions or concerns. For the
number of your nearest Heat-N-Glo dealer,
please call 612-890-8367.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 6000 DVTFL and is the answer not in the manual?

Questions and answers

Summarization of Contents

Safety and Warning Information
General Safety and Operational Warnings
Covers critical safety rules, warnings about water damage, solid fuel use, maintenance, and supervision.
Approvals, Codes, and Preparation
Approval Listings and Codes
Details certification standards, installation codes, and high altitude considerations.
Getting Started and Pre-installation
Overview of fireplaces, unpacking, inspection, and warranty information.
Fireplace Installation Procedures
Locating and Framing the Fireplace
Guidance on fireplace placement, dimensions, clearances, and framing requirements.
Vent System Installation
Covers vent system approvals, component identification, installation, firestops, and terminations.
Positioning, Gas, and Wiring
Instructions for positioning, gas controls, supply line, and electrical wiring.
Finishing and Final Assembly
Details on fireplace finishing, trim, logs, ember material, and final assembly.
Operation and Maintenance
Pre-lighting Checks and Lighting Procedure
Steps before lighting, including safety checks, and the procedure for lighting the fireplace.
Fireplace Maintenance Schedule
Guidelines for annual and periodic maintenance tasks like cleaning, checking flames, and vent systems.
Replacement Parts and Accessories
Ignition System Parts
Lists replacement parts for Standing Pilot and DSI ignition systems, including valves, ignitors, and modules.
Common Parts and Accessories
Details parts common to both ignition types, and optional accessories like fan kits and remote controls.

Table of Contents