Table of Contents
Advertisement
Models:
7000TR
6000TRB
6000SEB
WARNING: IF THE INFORMATION
IN THESE INSTRUCTIONS IS NOT
FOLLOWED EXACTLY, A FIRE OR
EXPLOSION MAY RESULT CAUS-
ING PROPERTY DAMAGE, PER-
SONAL INJURY, OR DEATH.
Printed in U.S.A. Copyright 2000,
Heat-N-Glo, a division of Hearth Technologies Inc.
20802 Kensington Boulevard, Lakeville, MN 55044
This product is covered by one or more of the following patents: (United States) 4,112,913; 4,408,594; 4,422,426; 4,424,792; 4,520,791; 4,793,322;
4,852,548; 4,875,464; 5,000,162; 5,016,609; 5,076,254 5,191,877; 5,218,953; 5,328,356; 5,429,495; 5,452,708; 5,542,407; 5,613,487; (Australia)
543790; 586383; (Canada) 1,123,296; 1,297,746; 2,195,264; (Mexico) 97-0457; (New Zealand) 200265; or other U.S. and foreign patents pending.
GUIDE
WARNING: IMPROPER INSTALLA-
TION, ADJUSTMENT, ALTERATION,
SERVICE OR MAINTENANCE CAN
CAUSE INJURY OR PROPERTY DAM-
AGE. REFER TO THIS MANUAL. FOR
ASSISTANCE OR ADDITIONAL INFOR-
MATION CONSULT A QUALIFIED IN-
STALLER, SERVICE AGENCY, OR THE
GAS SUPPLIER.
1. This appliance may be installed in an af-
termarket, permanently located, manufac-
tured (mobile) home, where not prohibited
by local codes.
2. This appliance is only for use with the type
of gas indicated on the rating plate. This
appliance is not convertible for use with
other gases, unless a certified kit is used.
Please contact your Heat-N-Glo dealer for any
questions or concerns. For the number of your
nearest Heat-N-Glo dealer, please call 952-985-6000.
1
Installers Guide
Underwriters
Laboratories Listed
INSTALLERS
Advertisement
Table of Contents
Related Manuals for Heat-N-Glo 6000TRB
Summarization of Contents
Safety and Warning Information
General Safety Precautions
Covers essential precautions regarding water exposure, fuel storage, qualified service, clearances, and supervision.
Vent System and Component Safety
Details critical safety rules for vent system installation, component integrity, and glass door handling.
Maintenance and Servicing Safety
Outlines safety measures before and during maintenance, including gas shut-off and component replacement.
Approvals and Codes
Appliance Certification
Information on the testing and listing of fireplace models by applicable laboratories.
Installation Codes
Requirements for conforming to local building codes and national standards for installation.
High Altitude Installations
Guidelines for adjusting the appliance's input rating based on installation elevation.
Getting Started
Introducing the Heat-N-Glo Gas Fireplaces
Overview of direct vent gas fireplaces and their operation.
Pre-installation Preparation
Steps and checks required before beginning the fireplace installation process.
Installing the Fireplace
Locating the Fireplace
Guidelines and diagrams for determining the proper placement and clearances for the fireplace.
Framing the Fireplace
Instructions and dimensions for constructing the fireplace opening and framing.
Installing the Vent System
Procedures for approving, installing, and configuring the direct vent system components.
Positioning, Leveling, and Securing the Fireplace
Methods for correctly placing, leveling, and fastening the fireplace unit to the framing.
The Gas Control Systems
Overview of the different gas control systems (Standing Pilot, DSI) and their wiring requirements.
The Gas Supply Line
Instructions for connecting the gas supply line, including shut-off valves and leak checks.
Gas Pressure Requirements
Specifications for minimum and maximum gas pressures for natural gas and propane.
Wiring the Fireplace
Guidance for electrical wiring of the fireplace, including DSI and standing pilot systems.
Finishing
Instructions for applying finish materials and sealing around the fireplace surround.
Installing Trim, Logs, and Ember Material
Steps for installing decorative trim, logs, and ember materials for visual appeal.
Before Lighting the Fireplace
Final checks and safety reviews to perform before the initial ignition of the fireplace.
Lighting the Fireplace
Procedures for the initial lighting and operation of the gas fireplace.
Maintaining and Servicing Your Fireplace
Fireplace Maintenance
General advice and schedule for annual appliance check-ups by a qualified technician.
Replacing Old Ember Material
Procedure for replacing ember material for optimal flame appearance and longevity.
Cleaning Burner and Controls
Instructions for cleaning the fireplace's burner and control compartment annually.
Checking Flame Patterns and Height
Guidelines for periodically inspecting flame patterns for steady operation and proper burner coverage.
Checking Vent System
Recommendations for inspecting the vent system before use and annually for obstructions.
Cleaning Glass Door
Procedures for cleaning the glass door, noting precautions for hot surfaces and abrasive cleaners.
Need help?
Do you have a question about the 6000TRB and is the answer not in the manual?
Questions and answers