Simrad PI44 SW 2.00 - RELEASE NOTE REV D Release Note page 2

Software changes
MMI Software 2.00
• All parameters related to Sensor
alarm and Calibration have
been moved to the Sensor
Configuration dialog.
• Catch filter setting Medium
introduced.
• Offset values from 9.9 to 99.9
units implemented for Height,
Geometry, Depth and Spread
sensors.
• Bug in Depth bars corrected.
• Bottom detector in echo sounder
improved to provide a more stable
marker when using bottom related
echograms.
• Geometry DF (differential)
implemented.
• Geometry Sensitive/Course
presentations introduced
• Geometry colour coded markers
introduced to indicate port and
starboard measurements.
• Sensor configuration application
improved by enhancing the
communication between the MMI
and DSP software.
• Corrected error in marker line for
temperature.
• Minor bug fixes.
Simrad
Kongsberg Maritime AS
Strandpromenaden 50
P.O.Box 111
N-3191 Horten, Norway
Simrad PI44/54
DSP Software 2.01
• Modified detector to better
withstand interference.
• Implemented new sensors.
• Implemented heavy filtering for all
analogue and digital sensors.
• Changed to avoid timeout when
several sensors are configured in
slow update rate, or when many
catch sensors are used.
• Enlarged range for valid
calibrations offset from [-9.9, ... ,
9.9] to [-99.9, ... , 99.9]
• Dynamic handling of lower bound
for negative measured values.
• Corrected possible error where
configured depth sensor looses the
depth value.
• Calibration is performed with
the user settings used before
calibration started. No interference
filter forced on, and no predefined
noise level used.
• Minor bug fixes.
Telephone: +47 33 03 40 00
Telefax: +47 33 04 29 87
www.simrad.com
simrad.sales@simrad.com
165255 / Rev.D / April 2010