Simrad ITI TRAWL SYSTEM - SERIAL DATA COMMUNICATION REV A Instruction Manual page 15

Serial line D
857-164777 / A
Serial line A
Navigator Echosounder
$IIDBS
@IIHFB
@IIHB2
$IIZDL
Table 1 shows the different parameters that can be transmitted by
ITI when activated in the menu. In addition, all messages received
on serial line B can be transferred out on Ethernet.
This transfer facility is activated from the command:
NMEA TRANSFER.
Optionally $IIGLL (trawl position) is available on Port C. This
require the parameter TEST2 to be set to 8 (Menu /
SYSTEMSETUP / TRAWL EYE), and is then independent on
whether SONAR OUTPUT has been activated.
Serial line B Serial line C
Aux
@IITDS @IITDS
@IITS2 @IITS2
@IIHFB @IIHFB
$IIMTW $IIMTW
@IITFI @IITFI
@IITPT @IITPT
@IITPC @IITPR
@IITTS $IIDBS
$IIGLL @IIDAD
$IIVTG @IIHB2
$SDDBS
$IIDBS
@IIHB2
@IIDAD
$PSIMT
$PSIMTH
$PSIMMW
$PSIMS1
$PSIMS2
$IIZDA
$PSIMH1
$PSIMH2
$PSIMG1
$PSIMG2
$PSIMCA
$PSIMDE
$PSIMTM
Table 1 Transmitted messages
Instruction manual
Ethernet
Sonar Aux
@IITDS
@IITS2
@IIHFB
$IIMTW
@IITFI
@IITPT
$IIGLL
@IIDAD
@IIHB2
@IITPC
7