Adjusting The Inclination - CONCORD TRANSFORMER X Manual

Pull the belt taut so that the lap belt and diagonal belt are well positioned and ensure
that the belts are not twisted. The lap belt should be in the lowest possible position. If
your vehicle is fitted with a seat belt height adjuster, adjust its height accordingly.
When you wish to release the child from the seat, all you need to do is open the lock
and pass the strap back across the child. To remove the shoulder belt from the guide,
press the shoulder belt locking button (06) and pull the belt forwards and out.
It is important to ensure that the belts are always correctly positioned each time the
seat is used. If in doubt about any aspect of fitting, check with CONCORD. The belts
must pass through the guides marked in red on the seat. Belts must not be routed in
any other way.
32
_ ADJUSTING THE INCLINATION
To use the inclination adjuster on
the CONCORD TRANSFORMER,
press the seat inclination button
(04) on the front edge of the seat.
Keeping the button pressed, move
the seat into the required position.
The inclination of the CONCORD
TRANSFORMER is continuously adjustable and
is locked into the current position when the seat
inclination button (04) is released.
33