Ricoh Aficio MP 3500P Printer Reference page 15

Menu
Edge to Edge Print
Default Printer Language
Tray Switching
❖ Host Interface
Menu
I/O Buffer
I/O Timeout
❖ PCL Menu
This menu can be selected only when the PCL unit is installed.
Menu
Orientation
Form Lines
Font Source
Font Number
Point Size
Font Pitch
Symbol Set
Courier Font
Extend A4 Width
Append CR to LF
Resolution
Description
You can select whether or not to print on the entire
sheet.
You can set the default printer language if the machine
cannot find the printer language automatically.
You can set to switch the paper tray.
Description
You can set the size of the I/O Buffer. Normally it is
not necessary to change this setting.
You can set how many seconds the machine should
wait before ending a print job. If data from another
port usually arrives in the middle of a print job, you
should increase this timeout period.
Description
You can set the page orientation.
You can set the number of lines per page.
You can set the storage location of the default font.
You can set the ID of the default font you want to use.
You can set the point size you want to use for the se-
lected font.
You can set the number of characters per inch for the
selected font.
You can specify the set of print characters for the se-
lected font. The available options are as follows:
You can select a courier font type.
You can extend the printing area width when printing
on A4 sheet with PCL.
When set to On, a carriage return will follow each line
feed: CR=CR, LF=CR−LF, FF=CR−FF.
You can set the print resolution in dots per inch.
7