Quick Reference Guide; Option Imaging Film Specifications (Ux-5Cr) - Sharp A260 - UX B/W Thermal Transfer Service Manual

UX-A260U

[6] Quick reference guide

SENDING FAXES
Place your document (up to 10 pages) face down in the document feeder.
Normal Dialing
1. Lift the handset or press SPEAKER
2. Dial the fax number.
3. Wait for the reception tone (if a person answers, ask them to press
their Start key).
4. Press START/MEMORY .
Search Dialing
1. Press or until the desired destination appears in the display.
2. Press .
START/MEMORY
Speed Dialing
SPEED
1. Press and enter the Speed Dial number.
2. Press .
START/MEMORY
RECORDING AN OGM
1. Press , , and .
REC/
MEMO
START/MEMORY
2. Lift the handset, press
STOP
3. When finished, press .
RECEIVING FAXES
RESOLUTION/
Press the until the arrow in the display points to the desired re-
RECEPTION MODE
ception mode.
RESOLUTION/
RECEPTION MODE
FAX mode: The fax machine automatically answers and receives faxes.
TEL mode: Answer all calls (even faxes) by picking up the handset. To
begin fax reception, press
START/MEMORY
TAD mode: Select this mode when you go out to receive both voice
messages and faxes.
STORING AUTO DIAL NUMBERS
1. Press FUNCTION once and once.
2. Enter a 2-digit Speed Dial number (01 to 40).
3. Enter the fax number and press
4. Enter the name by pressing number keys. (To enter two letters in
succession that require the same key, press
letter.)
G =
SPACE =
A = H =
B =
I =
C = J =
D = K =
L =
E =
F =
M =
STOP
5. Press START/MEMORY and then
.
, and speak into the handset.
TEL FAX
JAN-01 10:30
TAD
TEL FAX
JAN-01 10:30
TAD
TEL FAX
JAN-01 10:30
TAD
.
.
START/MEMORY
after entering the first
N =
U =
V =
O =
W =
P =
Q = X =
R =
Y =
S =
Z =
T =
.
[7] Option imaging film specifications
(UX-5CR)
1. Structure
This article is composed of polyester film coated with heat-resistant layer,
matt layer and hot melt ink layer, leader film and paper core. Ink film
specification is "DNP standard ink film HC".
Heat Resistant Layer
1
Base Film
2
Matt Layer
3
Hot melt Ink Layer
4
2. Details of compositions
2-1. Base film
Heading
Material
2-2. Heat resistant layer
Heading
Grade
2-3. Matt layer
Heading
Grade
2-4. Hot melt ink layer
Heading
Grade
1 – 4
manuals4you.com manuals4you.com
Requirements Measuring method
Polyethylene-
–
terephthalate
Requirements Measuring method
HR Mixer P-5 –
Requirements Measuring method
ML Sumi –
Requirements Measuring method
#507W –
1
2
3
4