Osm Controls - NEC LCD2010 - MultiSync - 20.1" LCD Monitor User Manual

E - 15
Controls

OSM Controls

MUTE
EXIT
The OSM controls on the front of the monitor provide the following
functions:
To access OSM menu, press any of the control buttons (
To mute sound function, press the EXIT button.
To rotate OSM between Landscape and Portrait modes, press the RESET button.
To change DVI/D-SUB signal input, press the PROCEED button.
NOTE : OSM must be closed in order to rotate, mute and change DVI/D-SUB signal
input.
EXIT
CONTROL /
CONTROL /
PROCEED
RESET
NOTE: When RESET is pressed in the main and sub-menu, a warning window will
appear allowing you to cancel the RESET function by pressing the EXIT button.
CN971B/LCD2010X/7A812101
DVI / D-SUB
CONTROL PROCEED
Main Menu
Exits the OSM controls.
Moves the highlighted area
up/down to select one of the
controls
Moves the highlighted area
left / rights to select
control menus.
Has no function.
Push PROCEED to activate
Auto Adjust.
Resets the highlighted contol
menu to the factory setting.
30
Controls
OSM
RESET
, , , ).
Sub-Menu
Exits to the OSM main menu.
Moves the highlighted area
up/down to select one of the
controls
Moves the bar left /
right to increase or
decrease the adjustment.
Activates Auto Adjust feature.
In Tool and Information Mode,
opens additional window.
Resets the highlighted contol
to the factory setting.
00.8.30, 2:21 PM