NEC LCD2010 - MultiSync - 20.1" LCD Monitor User Manual page 35

Controls
Information
DISPLAY MODE
Provides information about the current resolution display
and technical data including the preset timing being used
and the horizontal and vertical frequencies.
MONITOR INFO
Indicates the model and serial numbers of your monitor.
OSM Warning
OSM Warning menus disappear with Exit button.
No Signal: This function gives a warning when there is no signal
present. After power is turned on or when there is a change of
input signal or video is inactive, the No Signal window will
appear. The PROCEED button opens the DVI SELECTION
CONTROL, as indicated in the section for DVI selection.
Resolution Notifier: This function gives a warning of use with
optimized resolution. After power is turned on or when there is
a change of input signal or the video signal doesn't have proper
resolution, the Resolution Notifier window will open. This
function can be disabled in the TOOL menu.
Out of Range: This function gives a recommendation of the
optimized resolution and refresh rate. After the power is turned
on or there is a change of input signal or the video signal doesn't
have proper timing, the Out Of Range menu will appear. The
PROCEED button opens the DVI SELECTION CONTROL,
as indicated in the section for DVI selection.
NOTE: If "
switch to DVI SELECTION.
CN971B/LCD2010X/7A812101
CHANGE DVI SELECTION" is displayed,
35
E - 20
00.8.30, 2:21 PM