Oki B4545 MFP Safety And Warranty Manual page 8

Reactivity Data _____________________
Stability: Stable up to 200°C (392°F).
Conditions to Avoid: Electric discharge, throwing toner into
fire.
Polymerization: Will not occur.
Hazardous Decomposition or Byproducts: Combustion
products include harmful gases such as carbon monoxide and
carbon dioxide.
Incompatibility: Oxidizing materials.
Preventive Measures _________________
Personal Protective Equipment
Respiratory Protection: Not normally required. For large
spills, use dust respirator during cleanup.
Protective Gloves and/or Eye Protection: Not normally
required. For large spills, use rubber gloves and safety
goggles during cleanup.
Engineering Controls
Ventilation: None required with intended use.
Other Protective Equipment and/or Hygienic
Practices: None.
Spill Cleanup
Small Spills
1. Remove sources of ignition.
2. Carefully clean up the spill with a wet cloth, avoiding
inhalation of fine dust.
Large Spills
1. Remove sources of ignition and keep unnecessary and
unprotected personnel away from area.
2. Wear protective gear: respirator, rubber gloves, safety
goggles.
3. Vacuum the spill using a vacuum equipped with a HEPA
filter, then wipe up remainder with a wet cloth. Vacuum
should be electrically bonded and grounded to dispel
electricity.
Waste Disposal
Follow appropriate federal, state and local regulations.
Precautions
Precautions for Handling or Storage: Keep container
closed. Store in a cool, dry place. Keep out of reach of
children.
Other Precautions: None.
Shipping Information
Special Shipping Information: None.
UN Classification: None.
User's Responsibility _________________
This bulletin cannot cover all possible situations which the user
may experience when using this product. Each aspect of your
operation must be examined in regard to if, or where,
additional precautions may be necessary. All health and safety
information contained in this bulletin must be provided to your
employees or customers. It is your responsibility to use this
information to develop appropriate work practice guidelines and
employee instructional programs for your operation.
Preparation Date of MSDS _____________
Date: May 21, 2009.
Prepared by:
Oki Data Americas, Inc
Engineering Services Department.
2000 Bishops Gate Blvd.
Mt. Laurel, NJ 08054-4620
Tel: (856) 235-2600
Fax: (856) 222-5320
my.okidata.com
8: English