Oki B4545 MFP Safety And Warranty Manual page 6

to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the
receiver.
• Plug the unit into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/television
technician for help.
Note: It is the responsibility of the user to obtain the required
shielded cable in order to ensure compliance of this
equipment with FCC regulations.
Changes or modifications not expressly approved by Oki Data
may void your authority to operate this device.
FCC Radio Frequency Interference Statement for
220/240-Volt Models
WARNING: This equipment has been tested and found to
comply with the limits for a Class A digital device, pursuant to
Part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a
commercial environment. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct
the interference at their own expense.
Note: It is the responsibility of the user to obtain the required
shielded cable in order to ensure compliance of this
equipment with FCC regulations.
Changes or modifications not expressly approved by Oki Data
may void your authority to operate this device.
Industry Canada (IC)
Radio Interference Statements
120-Volt Models
This Oki Data apparatus complies with the Class B limits for
radio interference as specified in the IC Radio Interference
Regulations.
220/240-Volt Models
This Oki Data apparatus complies with the Class A limits for
radio interference as specified in the IC Radio Interference
Regulations.
Industry Canada (IC) Requirements for End Users
This product meets the applicable Industry Canada technical
specifications.
The Ringer Equivalence Number is an indication of the
maximum number of devices allowed to be connected to a
telephone interface. The termination on an interface may
consist of any combination of devices subject only to the
requirement that the sum of the RENs of all the devices does
not exceed five.
European Union Council of the European
Communities Statements of
Conformance for 220/240-Volt Models
Electromagnetic Conformance
This product complies with the requirements of the Council
Directive 89/336/EEC on the approximation of the laws of the
member states relating to electromagnetic compatibility.
Safety Conformance
This product is in conformity with Directive 73/23/EEC on the
harmonization of the laws of Member States relating to
electrical equipment designed for use within certain voltage
limits.
6: English