4
From here, you can:
Delete—Remove a previously stored certificate.
•
Download to File—Download or save the certificate as a .pem file.
•
Download Signing Request—Download or save the signing request as a .csr file.
•
Install Signed Certificate—Upload a previously signed certificate.
•
Setting certificate defaults
Administrators can set default values for certificates generated for a supported device. The values entered here will
be present in all new certificates generated in the Certificate Management task, even though those fields will remain
blank on-screen.
1
From the Embedded Web Server Home screen, browse to Settings ª Security ª Certificate Management.
2
Select Set Certificate Defaults.
3
Enter values in the appropriate fields:
Common Name—Type a name for the device (128-character maximum).
•
Note: Leave this field blank to use the domain name for the device.
Organization Name—Type the name of the company or organization issuing the certificate.
•
Unit Name—Type the name of the unit within the company or organization issuing the certificate.
•
Country Name—Type the country location for the company or organization issuing the certificate
•
(2-character maximum).
Province Name—Type the name of the province where the company or organization issuing the certificate
•
is located.
City Name—Type the name of the city where the company or organization issuing the certificate is located.
•
Subject Alternate Name—Type the alternate name and prefix that conforms to RFC 2459. For example, enter
•
an IP address using the format IP:1.2.3.4, or a DNS address using the format DNS:ldap.company.com. Leave
this field blank to use the IPv4 address.
Note: All fields accept a maximum of 128 characters, except where noted.
4
Click Submit.
Configuring confidential printing
Users printing confidential or sensitive information may opt to use the confidential print option, which allows print
jobs to be PIN-protected so that they remain in the print queue until the user enters a PIN on the operator panel of
the device.
1
From the Embedded Web Server Home screen, browse to Settings ª Security ª Confidential Print Setup.
2
Select an option for Max Invalid PIN:
Select 0 to allow users to enter an incorrect PIN as many times as they choose.
•
Select a value of between 2 and 10 to specify the number of times users can enter an incorrect PIN before
•
being locked out.
Using security features in the Embedded Web Server
22