Nova 2699-R How To Use

HOW TO USE YOUR
Bed Wedge with
Half Roll Pillow
Item Number: 2699-R
USING BED WEDGE AS A STANDARD WEDGE:
1
To sit up and use as a backrest, lay the wedge with the
widest end down, narrowest end up & flat side against
the wall/headboard.
2
To elevate your head and upper body, lay the wedge with
the widest end against the wall/headboard, narrowest end
under your body & flat side against the bed.
USING BED WEDGE WITH HALF ROLL PILLOW:
1
To elevate your head and upper body, lay the wedge with
the widest end against the wall/headboard, narrowest end
under your body & flat side against the bed.
2
Take Half Roll Pillow out of cutout and place on top of the wedge incline, with the
flat side face down. If sleeping on your side, rest arm in the cutout.
Used as a standard bed wedge
CARE INSTRUCTIONS FOR YOUR BED WEDGE
1
The cover can be easily removed and hand-washed with cold water. To remove the
cover, unzip and remove foam core. Hand-wash with cold water and air dry ONLY.
Daily maintenance can be done easily using a moist sponge or towel.
2
To clean the foam core remove the cover and spot clean with soap and water
using a moist cloth. After cleaning, allow the foam to dry completely before
replacing the cover and using.
EASES REPIRATORY
PROBLEMS
REDUCES STRESS ON
Used with Semi Roll Pillow
SPINE