Material Safety Data Sheet - Oki B2500MFP Safety & Warranty

Material Safety Data Sheet

#58378701
Black Toner: P/N 56120401
For more information, contact Oki Data at: 2000 Bishops Gate
Boulevard, Mount Laurel, NJ 08054-4620.
Emergency Information: call 1-800-654-3282; US and Canada
only.
Emergency First Aid Procedures ______
Toner inhaled.
Remove person to fresh air immediately. If symptoms occur,
seek medical attention.
Toner swallowed (ingested)
Dilute stomach contents with several glasses of water. If
symptoms occur, seek medical attention.
Toner gets in the eyes.
Immediately flush eyes with large quantities of cool water for
15 minutes, keeping the eyelids open with fingers. If symptoms
occur, seek medical attention.
Toner gets on the skin.
Wash toner off the skin with plenty of cool water and soap. If
necessary, seek medical attention.
Note: Small amounts of toner on skin or clothing can easily be
removed with soap and cold water. Hot water makes
toner harder to remove.
Hazardous Ingredients _____________
Carbon Black (<5% by weight): Group 2B Possible
Carcinogen
CAS#: 1333-86-4.
OSHA PEL: 3.5 mg/m
3
ACGIH TLV: 3.5 mg/m
3
Other Ingredients
Polyester Resin (30-70% by weight)
CAS#: Trade Secret.
OSHA PEL: Not available.
ACGIH TLV: Not available.
Magentite (<30% by weight)
CAS#: 1309-38-2.
OSHA PEL: Not available.
ACGIH TLV: Not available.
Styrene-acrylic Resin (<20% by weight)
CAS#: Trade Secret.
OSHA PEL: Not available.
ACGIH TLV: Not available.
Wax (<50% by weight)
CAS#: 8015-86-9.
OSHA PEL: Not available.
ACGIH TLV: Not available.
Silica (<5% by weight)
CAS#: 7631-86-9.
OSHA PEL: 15 mg/m3
ACGIH TLV: 10 mg/m
3
Physical Data __________________
Physical State: Solid.
Melting/Freezing Point: Not applicable.
Boiling Point: Not applicable.
PH: Not applicable.
Vapor Pressure: Not applicable.
Vapor Density (Air=1): Not applicable.
Evaporation Rate (Butyl Acetate=1): Not applicable.
Specific Gravity (H
Solubility in Water: Insoluble in water.
Solubility in Solvents: Not available.
Coefficient of water/oil Distribution: Not available.
Appearance and Odor: Black powder, slightly sour odor.
Odor Threshold: Not available.
Fire and Explosion Hazard Data _______
Minimal fire hazard. Large quantities may cause risk of dust
explosion.
Flash Point (Method Used): Not applicable.
Flammable Limits
Lower Explosive Limit: Not available.
Upper Explosive Limit: Not available.
Auto-Ignition Temperature: Not available.
Explosion Data
Sensitivity to Mechanical Impact: Not available.
Sensitivity to Static Discharge: Not available.
Extinguishing Media: CO
Special Fire Fighting Procedures: No special fire
protecting method is required.
Hazardous Combustion Products: None.
Toxicological Properties_____________
Routes of Entry: Inhalation, Ingestion, Eyes, Skin.
Effects of Acute Exposure
LD : Ingestion (oral) = >5000 mg/kg [Rat].
50
LD : Dermal = Not available.
50
LC : Not available.
50
Effects of Chronic Exposure
Prolonged inhalation of excessive dust may cause damage. It
is attributed to "lung overloading," a generic response to
excessive amounts of any dust retained in the lung for a
prolonged interval. Use of this product, as intended, does
not result in inhalation of excessive dust.
Exposure Limits: Not available.
Irritancy
Eye Irritation: Not available.
Skin Irritant: Non Irritant (PII = 0.0)
Sensitivity: Not available.
Carcinogenicity
IARC: Carbon Black, Group 2B, "Possible Carcinogen."
NTP: Not available.
OSHA: Carbon black is designated hazardous according to
OSHA 29 CFR 1910.1200.
Reproductive Toxicity: Not available.
Teratogenicity: Not available.
Mutagenicity: Negative (Ames test).
Name of Toxicoligically Synergistic Products: Not
available.
7: English
O=1): 1.45 at 25°C (77°F).
2
, water, foam and dry chemical.
2