MSR ELIXIR 4 Assembly Instructions

81-856
PACKAGE INCLUDES:
Frame assembly, tent body, rainfly, stakes, MSR
P R EPA R E F O R S ET UP
1. Spread tent out on top of footprint and stake out
four corners tightly.
2. Assemble poles.
AT TA C H R I D GE PO L E
1. Insert red ridge pole into grommets above doors, making sure
ridge pole rests on top of main poles.
USE TIPS: All tents require staking; unsecured tents are susceptible
to wind damage. In some conditions, additional stakes and cord
may be required. Re-adjustment of stakes and rainfly may be
necessary to keep tent tight and weatherproof. For complete
care and use instructions, refer to the Owner's Manual (available
at www.msrgear.com/Elixir4).
EL IXIR
Assembly Instructions
Footprint
®
1. Insert each red pole tip of main poles into grommets
2. Insert each gray pole tip of main poles into grommets
3. Attach color-coded clips to like-color pole along entire
1. Lay rainfly over tent. Attach rainfly's midpoint grommets
2. Stretch out vestibules until taut and stake down, making sure
M
O U N T A I N
4
™
ASSEMBLE T ENT FRAME
on the red stake loops.
on the gray stake loops.
length of frame assembly.
ATTACH RAI NFLY
to ridge pole.
seams align with frame.
© 2018 Cascade Designs, Inc.
4000 First Avenue South
Seattle, WA 98134 USA
S R 1-800-531-9531 1-206-505-9500
A F E T Y E S E A R C H
®