MSR MUTHA HUBBA NX Assembly Instructions

81-395
PACKAGE INCLUDES:
Frame assembly, tent body, rainfly, 2 guy cords, 2 tensioners,
8 MSR Mini-Groundhog™ Stakes, 1 repair sleeve
®
P R EPA R E F O R S ET UP
1. Spread tent out and stake out four corners tightly.
2. Assemble poles.
AT TA C H R I D GE PO L E
1. Insert ridge pole into grommets above doors.
2. Attach clips to ridge pole.
USE TIPS: All tents require staking; unsecured tents are susceptible to
wind damage. In some conditions, additional stakes and cord may
be required. Readjustment of stakes and rainfly may be necessary
to keep tent tight and weatherproof. A footprint can help keep your
tent clean, dry and protected from abrasion. Following these tips will
prolong the life of your tent. MSR
secure, maintain and enhance your tent.
For German, French, Spanish, Italian, Dutch and Japanese instructions go to www.msrgear.com/tents/ownersmanual
M U T H A H UB BA
A s se m b l y I n s t r u ct io n s
Please follow these instructions to guide you through assembly only.
For complete instructions on the recommended care and use of your tent,
please refer to Owner's Manual at www.msrgear.com/tents/ownersmanual.
offers a full line of accessories to
®
Watch video setup instructions, including Fast & Light
at www.msrgear.com/MuthaHubba
ASSEMBLE TENT FRAME
1. Insert tips of long main poles into grommets with color-coded
webbing at the stake loops.
2. Attach clips to frame.
AT TACH RAINFLY
1. Lay rainfly over tent, aligning red webbing to red stake loops, gray
webbing to gray stake loops. Attach the rainfly's midpoint grom-
mets to ridge pole. Secure rainfly Velcro tabs to main poles.
2. Place rainfly's adjustable loop grommets under the main pole ends
at all corners, inserting pole tips into grommets.
3. Stretch out vestibules until taut and stake down, making sure seams
align with frame.
M S R
O U N T A I N A F E T Y E S E A R C H
NX
™
option,
®
© 2014 Cascade Designs, Inc.
4000 First Avenue South
Seattle, WA 98134 USA
1-800-531-9531
1-206-505-9500
®