MSR Access 1 / 2, ACCESS Series Manual

PACKAGE INCLUDE

Frame assembly, tent body, rainfly, stakes

PREPARE FOR SETUP

1. Stake out four corners tightly.
   

ASSEMBLE TENT FRAME

1. Insert pole tips of main frame into floor grommets.
2. Attach clips to tent pole.

SETUP VESTIBULE

1. Place cross pole under main frame and insert pole tips into mid grommets.
2. Attach clips to tent pole.
3. Place clip below red washer.

STAKE VESTIBULE

1. Lay rainfly over tent, aligning seams to frame. Insert pole tips into rainfly grommets.
2. Stretch out vestibules till taut, stake down.

USE TIPS: All tents require staking; unsecured tents are susceptible to wind damage. In some conditions, additional stakes and cord may be required. Re-adjustment of stakes and rainfly may be necessary to keep tent tight and weatherproof.