MSR MUTHA HUBBA NX Assembly Instructions

81-855
PACKAGE INCLUDES:
Frame assembly, tent body, rainfly, stakes
P R EPA R E F O R S ET UP
1. Spread tent out and stake out four corners tightly.
2. Assemble poles.
AT TA C H C R O S S PO L E
1. Insert short cross pole into grommets at tent's midpoint.
2. Attach clips.
USE TIPS: All tents require staking; unsecured tents are susceptible
to wind damage. In some conditions, additional stakes and cord
may be required. Re-adjustment of stakes and rainfly may be
necessary to keep tent tight and weatherproof. For complete care
and use instructions, refer to the Owner's Manual (available at
www.msrgear.com/MuthaHubbaNX).
MUTHA HUBBA

Assembly Instructions

ASSEMBLE T ENT FRAME
1. Insert tips of long main poles into grommets at the stake loops.
2. Insert ridge pole into grommets above doors.
3. Attach clips to frame.
ATTACH RAI NFLY
1. Lay rainfly over tent. Attach the rainfly's midpoint grommets to ridge
pole. Secure rainfly Velcro tabs to main poles.
2. Place rainfly's adjustable loop grommets under the main pole ends
at corners.
3. Stretch out vestibules until taut and stake down, making sure seams
align with frame.
M S R
O U N T A I N A F E T Y E S E A R C H
NX
™
© 2016 Cascade Designs, Inc.
4000 First Avenue South
Seattle, WA 98134 USA
1-800-531-9531 1-206-505-9500
®