Table of Contents
Advertisement
Specifying the Data Location
Select whether the computer or USB memory device is the location where
scan data is to be saved. When transmitting via a network, refer to "Specify-
ing the Destination Address (Scan to E-mail/FTP/SMB)" on page 6-12.
If an address has been specified as the destination for the data,
TO PC
Saving Data on a Computer Connected (Scan to PC)
In order to perform Scan to PC operations, the following requirements must
be met.
This machine is connected to a computer using a USB cable.
The TWAIN scanner driver, the printer driver and LinkMagic (Windows
only) are installed on the computer.
Either LinkMagic is activated or the LinkMagic icon appears in the
Windows notification area.
The document is positioned at the location specified with Paper
Source (Flatbed (original glass) or ADF) in LinkMagic.
For details on LinkMagic, refer to the Reference Guide on the Docu-
mentation CD/DVD.
Follow the procedure described below to send scan data to a computer con-
nected to this machine.
The scan settings specified with LinkMagic are given priority. Specify
the various settings with LinkMagic. For details, refer to the Reference
Guide on the Documentation CD/DVD.
1
In the main screen (Scan mode), press the + or , key to select
, and then press the Select key.
TO
2
Press the + or , key to select
key.
The scan data is saved in the folder specified with LinkMagic. For
details, refer to the Reference Guide on the Documentation CD/DVD.
6-10
and
SCAN TO USB MEMORY
cannot be selected.
, and then press the Select
SCAN TO PC
Scanning With the Machine
SCAN
SCAN
Advertisement
Table of Contents
