Table of Contents
Advertisement
7
Use the keypad to type in the e-mail address, and then press the Select
key.
The settings are registered, and the DIAL REGISTER menu appears
again.
A maximum of 64 characters can be entered.
Registering Speed Dial Destinations (LDAP Search)
E-mail addresses can be registered as speed dial destinations by using infor-
mation on the LDAP server. A maximum of 250 speed dial destinations can
be registered.
To connect to an LDAP server, settings for
specified. For details, refer to the Reference Guide on the Documenta-
tion CD/DVD.
Machine key operations cannot be used to register an FTP address or
SMB address as a speed dial destination. These addresses can be
registered with Local Setup Utility (LSU) or PageScope Web
Connection. For details, refer to the Reference Guide on the Docu-
mentation CD/DVD.
Speed dial destination numbers 221 to 250 are reserved for register-
ing FTP addresses and SMB address from Local Setup Utility (LSU)
or PageScope Web Connection.
1
In the main screen (Scan mode), press the + or , key to select
, and then press the Select key.
ITY
2
Press the + or , key to select
Select key.
3
Press the + or , key to select
key.
4
Use the keypad to type in the number (between 1 and 220) for the speed
dial destination, and then press the Select key.
5
Press the + or , key to select
Select key.
If an LDAP server is not specified,
appear.
6
Press the + or , key to select
Select key.
To search registered names, select
addresses, select
6-22
DIAL REGISTER
SPEED DIAL
LDAP SEARCH
LDAP SEARCH
or
NAME
E-MAIL
NAME
.
E-MAIL
Scanning With the Machine
LDAP SETTING
, and then press the
, and then press the Select
, and then press the
does not
, and then press the
. To search e-mail
must be
UTIL-
Advertisement
Table of Contents
