Omix-Ada Rugged Ridge Alloy 11651.07 Manual

Contents:
• (1) Left Rear Body Armer
Required Tools:
• Phillips screwdriver
• Socket Driver
• 7 mm. Socket
• Flathead screwdriver (Only for 2 Door)
1. Remove the licence plate using phillips screwdriver.
(For 2 Door using a Flathead screwdriver)
2. Remove the licence plate holder using a socket driver and 7 mm. socket.
3. Remove the driver side and passenger side tail light using a phillips
screwdriver.
PHONE: M-F 8am - 5pm EST 1-800-449-6649 | EMAIL: techsupport@omix-ada.com
460 Horizon Drive #400 | Suwanee, GA 30024 USA | www.omix-ada.com | Copyright © 2013 Omix-Ada
JEEP JK BODY ARMOR
®
OMIX-ADA TECHNICAL SUPPORT
®
FOR WARRANTY INFORMATION VISIT: www.Omix-Ada.com
11651.07 : 2 Door Left/Right Rear Body
11651.09 : 4 Door Left/Right Rear Body
• (1) Right Rear Body Armer
Page 1/2
® , Inc.