Omix-Ada Rugged Ridge Alloy 11401.21 Manual

Grill Insert - 1
1. Open vehicle hood, remove grill rivets with a flat tool (e.g.
screwdriver). Unplug marker lights. Pull grill off from spring clips
attached at bottom of grill. Save components removed.
NOTICE
Aftermarket winch and/or bumper may need to be
removed.
2. Place grill insert and grill fasteners inside grill.
NOTICE
Cutout in grill insert should be positioned to the lower
side of grill on driver's side. (Circled in Red)
PHONE: M-F 8am - 5pm EST 1-800-449-6649 | EMAIL: techsupport@omix-ada.com
460 Horizon Drive #400 | Suwanee, GA 30024 USA | www.omix-ada.com | Copyright © 2013 Omix-Ada
JEEP JK GRILL INSERT
®
Grill Fasteners - 2
OMIX-ADA TECHNICAL SUPPORT
®
FOR WARRANTY INFORMATION VISIT: www.Omix-Ada.com
Page 1/2
Stainless Steel 11401.21
Black 11401.31
Stainless Steel 11401.22
Black 11401.32
Bolt - 4
Washer - 4
Lock Nut - 4
® , Inc.