E-Z UP HW3RB10ALGY Instructions

h W S
alf all et
Step 1.
Completely set up your E-Z UP
in the area that you intend to shade according to the
owners manual instructions.
Step 2.
Attach half wall to frame as shown. (2) Attach
quick attachment truss clips around the top truss as shown.
Step 3.
Wrap quick attachment hook and loop straps around the
legs of the shelter Just above the Auto Slider
(3a) Press straps into pad firmly.
Note:
•
The top of the half wall tucks underneath the valance of the
fabric top.
Half Wall Care:
Use a mild soap (not detergent) and plenty of water for cleaning.
Let the E-Z UP ® Instant Shelter
Important Information:
• Always stake or weigh down your shelter. Do not use in any
potentially windy or rainy weather. Wind and rain can damage the
E-Z UP Instant Shelter product and may also result in injury to you
® ®
or others. Therefore, do not rely on shelter for protection in heavy
or prolonged rain storms.
• The E-Z UP Instant Shelter
®
shelter. Do not leave up for extended periods.
© Copyright 2015 International E-Z UP, Inc. USA. All rights reserved. IN.HW.0425
S
helter
U
p
Instant Shelter
®
® Pull Pin and mid-leg.
® top, frame and walls dry completely before closing or storing to avoid mildew.
product is designed as a temporary
®
INTERNATIONAL E-Z UP, INC.
1900 Second Street, Norco, California 92860 USA
Phone (951) 279-0999 • Fax (951) 279-0888
I
nstructIons for
h W
alf
®
Auto Slider
®
Pull Pin
Quick
Attachment Strap
Leg
Diagram of installed Half Wall
(2)
(3a)
• Use caution when handling the E-Z UP
pinching hands or fingers as frame opens or closes.
• Do not use shelter in a lightning storm.
• Do not leave your E-Z UP
• Do not build fires within shelter enclosure.
ezup.com
800 -45 SHADE
8 0 0 - 4 5 7 - 4 2 3 3
a
all cceSSory
Top
Truss
Truss Clips
(3)
folding frame. Avoid
®
Instant Shelter product unattended.
® ®
Lower
Truss