Table of Contents
Advertisement
Installation
Start the computer. Make sure VideoMate DVB-U2000 is not connected to your
computer.
Step 1. Insert the installation CD into your CD drive. If you have Autorun
enabled, the installer will start automatically. (If Autorun is not enabled,
double-click on "setup.exe" on the installation CD.)
Step 2. Choose Complete to install all necessary software (VideoMate
DVB-U2000 drivers, ComproDTV).
Step 3. Follow the directions to install the drivers and software.
Step 4. When installation completes, press Finish to restart computer.
Step 5. When Windows has booted, plug in the USB power cable in
DVB-U2000 power port and an available USB port of computer.
Step 6. Then plug in the USB cable in VideoMate DVB-U2000 USB port and
an another available USB port of computer.
Step 8. If you see the Windows Logo
testing message, you should
ignore it and press Continue
Anyway
image on the right.)
Step 9. Click Finish to complete the
installation.
Step 10. Plug in the TV signal cable in the VideoMate DVB-U2000 TV-In
connector.
Step 11. Start ComproDTV and enjoy the show.
4
to
proceed.
(See
Step 7. After plugging in the USB
cable, Windows will start the
Found
Wizard. Follow the directions
and click Next. (See image
on the left.)
New
Hardware
Advertisement
Table of Contents
Need help?
Do you have a question about the DVB-U2000 - START UP GUIDE and is the answer not in the manual?
Questions and answers