Advertisement
Installation
Start the computer. Make sure VideoMate U3 is connected to your computer
and insert the installation CD into your CD drive.
Step 1. Windows will detect a new device and start the Add/Remove
Hardware Wizard. Please press Cancel and go to the next step.
Step 2. Insert the installation CD into your CD drive. If you have Autorun
enabled, the installer will start automatically. (If Autorun is disabled,
double-click on "setup.exe" on the installation CD.) You can choose
Complete to install all necessary software (VideoMate U3 drivers,
ComproDTV, ComproDVD, Ulead PhotoExplore 8.5 SE) or choose
Custom to select item by item. Compro recommends you choose
Complete.
Step 3. If you see the Windows Logo testing message, below, please press
"Continue Anyway" to proceed.
Step 4. Press Next to install ComproDTV, ComproDVD, Ulead PhotoExplore
8.5 SE.
Step 5. After each program is successfully installed, press Finish to proceed.
Step 6. When installation completes, press Finish to restart computer.
Step 7. Connect TV signal.
Step 8. Open ComproDTV to enjoy the show.
4
Continue Anyway
Advertisement
Need help?
Do you have a question about the U3 - START UP GUIDE and is the answer not in the manual?
Questions and answers