Page 1
INSTRUCTION MANUAL Espresso Co ee Machine Model: NEUTRON PRO HOUSEHOLD USE ONLY Please read all instructions carefully before using the product...
CONTENTS IMPORTANT SAFEGUARDS ...................... KNOW YOUR ESPRESSO COFFEE MACHINE ................ CONTROL PANEL ........................SPECIFICATIONS ........................BEFORE FIRST USE ........................HOW TO TAMP THE GROUND COFFEE .................. HOW TO MAKE AN ESPRESSO ....................INSERTING THE PORTAFILTER ..................MAKING ESPRESSO ........................ IDEAL EXTRACTION ......................UNDER EXTRACTION ......................
IMPORTANT SAFEGUARDS Before using the appliance, the following basic precautions should always be followed: Read all instructions. Before using check that the voltage of wall outlet corresponds to rated voltage marked on the rating plate. This appliance has been incorporated with a grounded plug. Please ensure the wall outlet in your house is well earthed.
Page 4
Do not let the appliance operate without water. DO NOT remove the metal portafilter while brewing co ee. Metal parts will be hot. Please make sure to hold it by the handle and use caution when moving unit with hot liquids. Connect plug to wall outlet before using and turn o all switches for plug is removed from the wall outlet.
Page 5
2) If the appliance is of the grounded type, the extension cord should be a grounding type 3-wire cord. 3) The longer cord should be arranged so that it will not drape over the counter top or table top where it can be pulled on by children or tripped over.
KNOW YOUR ESPRESSO COFFEE MACHINE 23 24 1. Stainless Steel Cup Warmer Plate 9. Water Tank Lid 17. Steam Wand 2. Panel Control 10. Water Tank 18. NTC Milk Sensor 3. Anti-scalding Sleeve Hot Water Wand 11. Spring Loaded Tamper D.58 19.
CONTROL PANEL ON/OFF AMERICANO MENU & CONFIRM SINGLE DOUBLE A. Power Button: Press to power ON/OFF. B. AMERICANO Button: Press to brew an americano. C. MENU & CONFIRM Button: Press to enter and press and hold more than 3 seconds to exit the main menu, turn to navigate in the menu.
20.46 LBS Dear customer, Thank you for your purchase of the CASABREWS Espresso Co ee Machine. To ensure you get the best use of this machine, please take the time to read this manual and learn how to use this espresso co ee machine, even if you are an experienced home barista –...
BEFORE FIRST USE Remove and discard all labels and packaging materials attached to your espresso co ee machine. Ensure you have removed all parts and accessories before discarding the packaging. Remove the packaging and the plastics bags containing the accessories. Clean the water tank, portafilter, filter baskets, milk jug and drip tray using warm water and a gentle dishwashing liquid.
Page 10
To go ahead SINGLE button must be pressed and machine starts flushing from brew head for 30 seconds, afterwards automatically stop brewing. You cannot stop dispensing water during 30 seconds of flushing. NOTE: This FLUSH process run for the first time only or when you resetting defaults and you turn machine o and on.
The provided filters are designed for: ONE CUP filter = approx. 13-15g TWO CUP filter = approx. 19-21g Insert either the ONE CUP or TWO CUP filter into the portafilter. HOW TO TAMP THE GROUND COFFEE Using the spring loaded tamper, tamp down firmly using approx. 11-22lbs (5-10kg) of pressure.
HOW TO MAKE AN ESPRESSO NOTE: Before inserting the portafilter, move the hot water wand to avoid interference. INSERTING THE PORTAFILTER Place the portafilter underneath the brew head so that the handle is aligned with the INSERT LOCK INSERT position. Insert the portafilter into the brew head and rotate the handle towards the centre until firm resistance is felt.
Solutions: * Fast flow like water. * Select a finer pre ground co ee or grind settings in your CASABREWS grinder. * Crema is thin and pale. * Increase the amount of ground co ee and retry. * Espresso is pale brown.
HOW TO PROGRAM THE VOLUME OF SINGLE/DOUBLE ESPRESSO PROGRAMMING ESPRESSO VOLUME Press the MENU button to enter the main menu, machine will beep. Main menu Use the MENU dial to navigate through the menu until LCD shows SINGLE or DOUBLE SHOT are flashing.
HOW TO SET THE ESPRESSO TEMPERATURE Press MENU button to enter to the main menu, then machine will beep. Main menu Use the MENU dial to navigate through the main menu, until LCD shows such flashing icons, then press MENU dial machine will beep. Selecting single and double espresso shot temperature icons in the dashed rectangle are flashing...
HOW TO FROTH THE MILK This machine is installed with a dedicated heater to make steam. When lateral white LED turns NOTE: to be illuminated, then steam is ready to use. Before frothing the milk, release steam for 5-10 seconds. This process is to purge out the residual water inside the steam wand.
Page 17
Turn STEAM knob in OFF position. STEAM Remove the steam wand from milk pitcher. HOT WATER Wipe the steam wand with a clean damp cloth. Then return to lowered position over the drip tray, point it out toward into the slot of the drip dray grid. After frothing milk, it is recommended to flush the residual milk from the steam wand.
Machine will stop steaming when preset temperature is reached. (Default setting is hot). Upon machine reached preset temperature of NOTE: milk, and steam knob is still in STEAM position, then LCD blinks icon and temperature icon for three times then one beep is emitted and repeat it again. Until steam knob is back in OFF position.
Turn MENU dial to select the steam temperature you want, then press the MENU dial. You are able to choose three preset temperatures: During selecting the temperature of steam Cool Middle Default parameter is hot. The machine will beep to indicate that the custom setting has been programmed. Then machine will return to READY mode.
The machine automatically stop, machine will beep, once the pre-set volume has been extracted, then LCD will go back to READY mode, but brewing time and maximum pressure will flash for 10 seconds, then they will disappear. You are able to press SINGLE, DOUBLE or AMERICANO button for the next brewing immediately.
The machine will beep to indicate that the custom setting has been programmed. Then machine will return to READY mode. HOW TO MAKE HOT WATER STEAM Point hot water wand toward the cup. The hot water function can be used to clean and preheat cups, or to add hot water manually.
HOW TO SET THE HOT WATER TEMPERATURE Press MENU button to enter to the main menu, then machine will beep. Main menu Use the MENU dial to navigate through the main menu, until LCD shows such flashing icons, then press MENU dial.
CLEANING AND MAINTENANCE To prevent damage to the appliance, do not use alkaline cleaning agents when cleaning, use a soft Caution: cloth and mild detergent. FLUSH CLEANING CYCLE FLUSH cycle can keep the machine in working order and ensure perfect co ee flavor, a constant co ee flow, and excellent milk froth for a long period of time.
NOTE: You cannot stop dispensing water from brew head during 30 seconds of flushing. Once the FLUSH cleaning cycle is complete, the machine will beep and return to READY mode. Empty and rinse the cup and portafilter, and clean the drip tray. DESCALING Use this function to access descaling cycle, upon DESCALE is appeared into LCD.
Page 25
02. Begin Descaling a) Press the MENU button to enter the main menu. Main menu b) Use the MENU dial to navigate through the menu, until LCD shows DESCALE is flashing. c) Press MENU dial then MENU dial and DOUBLE button are illuminated.
03. Flush a) Put an empty cup beneath the portafilter and steam wand. b) Hot water wand must be pointed out toward the cup. c) Press SINGLE button, machine will start flushing. During flushing, water will flow through the group head, hot water and steam wand alternately SINGLE and DOUBLE buttons will flash alternatively and the LCD will count from 4 to 6.
CLEANING THE FILTERS AND PORTAFILTER The filters and portafilter should be rinsed under hot water immediately after use to remove all residual co ee oils. If any of the holes in the filter become blocked, use the cleaning needle provided to unblock the holes. If the holes remain blocked, soak filter and portafilter in hot water for approx.
RESETTING TO DEFAULTS Press the MENU button to enter the main menu. Main menu Use the MENU dial to navigate through the menu, until LCD shows RESET DEFAULTS is flashing, then press the MENU dial. The machine will beep. When selecting to reset default settings icon in the dashed rectangle is flashing The single and double espresso, americano, hot water and steam temperature, single and double espresso volume settings will all return to the default settings.
Until steam knob is back to OFF position If the machine shows “E03” on the LCD, check and return the STEAM knob to the “OFF” position. If the machine still shows “E03” after returning the steam knob to “OFF” position, please contact NOTE: CASABREWS customer support.
Page 30
If the machine shows “E02” on the LCD, press any buttons except Power button to cancel this error. If the machine shows “E04” on the LCD, please contact our customer support team. If the machine shows “E10”, “E11”, “E12”, “E13” on the LCD, please contact our customer support team.
OVERHEATING PROTECTION If LCD screen shows , it means machine is in overheating protection. 1) Put an empty cup beneath the portafilter. 2) Hot water wand must be pointed out toward the cup. 3) To cancel this error, turn steam knob in HOT WATER position for 10-15 seconds, and then turn steam knob back to OFF position.
TROUBLESHOOTING PROBLEM POSSIBLE CAUSE SOLUTION The machine is not plugged in. Plug the machine in. The machine does not turn The machine is faulty. Contact our customer support team. Water tank is empty. Fill tank. Water tank is not properly attached. Push water tank down completely to lock into Water does not flow from place.
Page 33
There are ground co ee on the Clean any residual ground co ee from the Co ee or water leaks surface of the brew head. surface of the brew head. out around the edge of the portafilter. Too much ground co ee in the filter Decrease the amount of ground co ee.
Page 34
Water leaks from the The machine is faulty. Contact our customer support team. steam wand when brewing or frothing. All buttons won't stop The machine is faulty. Contact our customer support team. flashing in white when the machine is turned on. Machine fails to program Out of range of the allowable volume.
WARRANTY INFORMATION The manufacturer provides warranty in accordance with the legislation of the customer's own country of residence, with a minimum of 12 months, starting from the date on which the appliance is sold to the end user. The warranty only covers defects in material or workmanship. The warranty will not apply in cases of: - Normal wear and tear.
Need help?
Do you have a question about the NEUTRON PRO and is the answer not in the manual?
Questions and answers