on stage KSA7500 Assembly Instructions

ASSEMBLY INSTRUCTIONS
Congratulations on your purchase of the KSA7500 Universal Second Tier. Please read
the following assembly instructions carefully to learn how to properly fit your stand
with this 2nd tier unit. We hope you enjoy your new purchase!
1. Remove rear end cap from
upper arms of keyboard stand
(see photo to the right).
2. Take 2nd Tier assembly and
insert mounting attachment into
tubing of stand (see photo to right).
3. Use the 2" inch tightening knob
on the 2nd tier unit to lock 2nd tier
into your stand.
4. Insert the telescoping stablizer
bar into provided holes on the 2nd
Tier unit and tighten knobs to lock
the bar in place.
KSA7500
© 2004 TMP, Inc.
www.musicpeopleinc.com
www.onstagestands.com