DigiTech STUDIO QUAD V2 User Manual page 26

24
Section 3 - Effects and Parameters
PARAM. DESCRIPTION
FX: Lvl Controls the signal input level fed to the Module. Varies from OFF to 100%.
Dry: Lvl Controls the level of the dry (uneffected) signal. Ranges from OFF to 100%.
Balance Controls the left/right posistioning of the dry signal in the stereo soundfield. Varies from
-99 (all left) to -99 (all right).
Shft A - B SHFTA and SHFTB control the pitch intervals between the original note and voices A and
B of the pitch shifter. Pitch shifters can be used for a wide variety of effects, including
doubling, octave division, and chromatic harmonies. Each Pitch Shifter has a 4-octave
range, stepped in semitones from -24 to +24.
Dtn A - B Controls the detuning amount for pitch-shifted voices A and B. As DTN moves away from
zero, dissonance becomes more pronounced. Low DTN settings can be useful for
thickening or enhancing the imaging of the source material. Ranges from -50% to 50%.
Shft C - D See Shift A - B
Dtn C - D See Detune A - B
Shft E - H See Shift A - B
Dtn E - H See Detune A - B
Shft See Shift A - B
Dtn See Detune A - B
Key Key allows you to set the musical key for the harmonies. If the song you are playing is in
the key of G Major, you would select G for the scale.
Scale Scale sets the scale type for the Harmony you want to hear. Scale types include: Major,
Minor, Harmonic Minor, Melodic Minor. Dorian, Mixolydian, Lydian, Lydian Augmented,
Major Pentatonic, Minor Pentatonic, Blues, Whole Tone, Half-Whole,and Whole-Half.
Interval Interval sets the basic interval of the Harmony. You can choose from one of several
Harmony intervals. See pg. 42 for Harmony Interval Chart reference.
Out A - B Adjusts the overall level of pitch-shifted voice A or B. Ranges from OFF to 100%.
Pan A - B Controls the placement of pitch-shifted voice A or B in the stereo image. Varies from -99
(all left) to 99 (all right).
Out C - D Adjusts the overall level of pitch-shifted voice C or D. Ranges from OFF to 100%.
Pan C -D Controls the stereo soundfield placement of pitch-shifted voice C or D. Varies from -99
(all left) to 99 (all right).
Out E - H Adjusts the overall level of pitch-shifted voices E through H. Ranges from OFF to 100%.
Pan E - H Controls the stereo soundfield placement of voices E through H. Varies from -99 (all left)
to 99 (all right).
Out L - R Adjusts the left or right output level of the pitch-shifted voice. Ranges from OFF to 100%.
Out LA - LB Adjusts the left side level of pitch-shifted voice A or B. Ranges from OFF to 100%.
Out RA - RB Adjusts the right side level of pitch-shifted voice A or B. Ranges from OFF to 100%.
Spread Controls the width of the effect's stereo imaging. The higher the setting, the wider the
image. The lower the setting, the more monophonic the effect becomes. Range: 1 to 10.
Studio Quad V2 User's Manual
Pitch Shifters