DigiTech STUDIO QUAD V2 User Manual page 21

Studio Quad V2 User's Manual
PARAM.
FX: Lvl
Dry: Lvl
Balance
Speed
Depth
Depth 1 - 2
Wander Speed Controls the secondary LFO speed of chorus voices 5-8. This is a secondary oscillator for voices 5-8 that
Wander Depth Adjusts the intensity of the oscillation deviations produced by WANDER SPEED. WANDER DEPTH
WvFrm
DlyA - B
DlyC - D
DlyE - H
Out A - B
Pan A - B
Out C - D
Pan C - D
Out LA - LB
Out RA - RB
Spread
DESCRIPTION
Controls the signal input level fed to the Module. Varies from OFF to 100%.
Controls the level of the dry (uneffected) signal. Ranges from OFF to 100%.
Controls the left/right positioning of the dry signal in the stereo soundfield. Varies from -99 (all left) to
99 (all right).
Controls the Low Frequency Oscillator (LFO) speed of the chorus.
Range of this control is from 0.06 to 16 Hz.
Adjusts the intensity of the chorus effect. High settings produce dramatic modulation, while lower
settings can be used to produce a more subtle, ambient swirling. Varies from 0 to 30 milliseconds.
Octal Chorus only. DEPTH1 adjusts the intensity of chorus voices 1-4. DEPTH2 adjusts the intensity of
chorus voices 5-8. Ranges from 0 to 30 milliseconds.
causes deviations from the oscillation path set by DEPTH2. This control can produce radical new textures
when used creatively. Try setting it slightly faster or slower than SPEED. Ranges from 0.06 to 2.0 Hz.
produces dramatic psycho-acoustic swirling effects when set higher than DEPTH2. Ranges from 0
to 10 milliseconds.
Selects which waveform the LFO follows. Options for this control include sine, triangle,
SP1 (Special 1), and SP2 (Special 2).
Controls the delay time of chorus voices A and B. Higher delay time settings produce a more dramatic
sweeping sound. Ranges from 0 to 60 milliseconds.
Controls the delay time of chorus voices C and D. Higher delay time settings produce a more dramatic
sweeping sound. Ranges from 0 to 60 milliseconds.
Controls the delay time of chorus voices E - H. Higher delay time settings produce a more dramatic
sweeping sound. Ranges from 0 to 60 milliseconds.
Adjusts the overall level of chorus voice A or B. Ranges from OFF to 100%.
Controls the placement of chorus voice A or B in the stereo image. Varies from -99 (all left) to 99 (all right)
Adjusts the overall level of chorus voice C or D. Ranges from OFF to 100%.
Controls the placement of chorus voice C or D in the stereo image. Varies from -99 (all left) to 99 (all right).
Adjusts the left side level of chorus voice A or B. Ranges from OFF to 100%.
Adjusts the right side level of chorus voice A or B. Ranges from OFF to 100%.
Controls the width of the effect's stereo imaging. The higher the setting, the wider the image. The lower
the setting, the more monophonic the effect becomes. Ranges from 1 to 10.
19
Choruses
Section 3 - Effects and Parameters