Section Two - Editing Functions; Editing/Creating Presets - DigiTech RP200A User Manual

Section Two - Editing Functions

Editing/Creating Presets

Creating your own signature sound with the RP200 Artist is easy and intuitive.The RP200 Artist
lets you create your own Presets, or fine tune existing Presets to suit your needs. When creating
or editing a sound, you must first start with one of the User or Factory Presets. It is not possible
to start with a completely empty Preset.The Preset number does not necessarily need to be the
location which you intend to have it reside, as you can save your creation to any User Preset
location during the store process.
To edit or create a Preset:
1. Use the Footswitches to select a Preset which will be your starting point.
2. Once you have found a Preset that you wish to edit, press the Select button once.This
will take you into the Editing mode.
3. Use the Select button in conjunction with the Matrix to choose the effect you wish to
edit.
4. Use the 3 Parameter Knobs to change parameter values to achieve the desired sound.
11