Download Print this page

AVS Ventvisor VV114 Instruction Manual

Deflector

Advertisement

Quick Links

For proper installation and best possible fit, please read all instructions BEFORE you begin.
For technical assistance or to obtain missing parts, please call Customer Relations at 1-800-241-7219.
Important Safety Information
• CAUTION - Before driving, ensure that the vent visor is properly secured to vehicle.
• Do not use automatic "brush-style" car washes.
• Do not use cleaning solvents of any kind.
• Periodically check all components for tightness.
Contents - 4 Piece Set
Front Driver
Side Visor
Contents - 6 Piece Set
Front Driver
Side Visor
Tools Required
Preparation Before Painting / Installation
• A trial fit is recommended to ensure proper positioning and fit.
• Check fit of parts before painting as we will not accept the return of modified or painted parts.
• Wash and dry your vehicle to remove any debris and/or dirt from the installation area.
Installation Steps
Clean the window frames with an alcohol pad and dry
1 1
Installation Instructions
Ventvisor
NOTE: Actual product may vary from illustration.
Front Passenger
Side Visor
Front Passenger
Side Visor
Car Wash Supplies
NOTE: Actual application may vary slightly from illustrations.
with a soft cloth.
Deflector
®
Rear Driver
Side Visor
Rear Passenger
Side Visor
Rear Driver
Side Visor
Rear Passenger
Side Visor
Clean Towel
Peel back 2" (5cm) of tape liner from each end of top flange. En-
sure free ends are accessible. Remove tape liner from rear flange.
free end
rear flange
(remove tape liner)
1 2
Page 1 of 3
I - Sheet Number VV114 Rev.C
Alcohol Pad x4
Ext. Rear Driver
Side Visor
Alcohol Pad x6
Ext. Rear Passenger
Side Visor
top flange
free end

Advertisement

loading
Need help?

Need help?

Do you have a question about the Ventvisor VV114 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for AVS Ventvisor VV114

  • Page 1 Installation Instructions I - Sheet Number VV114 Rev.C Ventvisor Deflector ® For proper installation and best possible fit, please read all instructions BEFORE you begin. For technical assistance or to obtain missing parts, please call Customer Relations at 1-800-241-7219. Important Safety Information •...
  • Page 2 Installation Steps NOTE: Actual application may vary slightly from illustrations. Align the Front Visor on the outside of the door frame. The top flange of the Front Visor will attach to the door frame. NOTE: Align with edge of door frame. Gently press the exposed areas of tape against the surface and Apply pressure along all flanges to ensure proper adhesion of tape.
  • Page 3 Lund International 800-241-7219 • Visit us at lundinternational.com © 2018 Lund, Inc. All rights reserved. Auto Ventshade™, the Auto Ventshade™ logo and the AVS™ logo are trademarks of Lund, Inc. ™ Page 3 of 3...