Effects; Chorus - DigiTech RP100 User Manual

Of - Turns the Noise Gate off.
ng - Selects the Silencer™ Noise Gate.
A1 to A9 - Selects the Auto Swell volume swell effect. These settings will auto-
Gate Thresh - The Parameter 3 knob sets the signal strength (Threshold) required to open
or close the Noise Gate.The Gate Threshold parameter ranges from 1 (opens
easily) to 40 (requiring strong signals to open).

Effects

The Effects row in the RP100 is a multi-function module, allowing you to select effects such as;
Chorus, Flanger, Phaser,Tremolo, Panner, Rotary Speaker,Vibrato, AutoYah™, Envelope, Pitch Shift,
Detune, and Whammy™ effects. When the Effects row is selected, the Parameter 3 knob is
used to choose the type of Effect to be used. Only one of the effects in this row can be used at a
time. After selecting the type of effect in this module, the Parameter 1 and Parameter 2
knobs can then be used to adjust the individual parameters associated with the selected effect.
The following list describes each Effect and their parameters in more detail:
Chorus (CH)
A Chorus adds a short delay to your signal.The delayed signal is modulated in and out of tune
and then mixed back with the original signal to create a thicker sound.
Amount - The Parameter 1 knob simultaneously adjusts the rate (Speed) and intensity
(Depth) of the modulation. Ranges from 1 to 99.
Level - The Parameter 2 knob controls the mix level of the Effect. Ranges from 0 to 99.
matically ramp up the volume from a 200 milliseconds volume fade in
to 2 second volume fade in.
19