Dual Delay - DigiTech RP-7 VALVE User Manual

Section - 4 Effects and Parameters

Dual Delay

Parameters
On/Off
Type
Level (Mix)
Delay 1
Delay 2
Feedback
Delay times 1 & 2 can be programmed independently. However, On/Off, Type, Level, and Feedback will program the same for BOTH Delays
1 & 2. For example, if you choose to program your Level to 50, both Delays 1 & 2 will be 50. Delay Parameters are as follows:
On / Off
Type
Type:
1
2
3
4
5
6
7
Level
Delays 1 & 2
Feedback
18
Displayed Values
O n - B y p
1 . . . 7
0 . . . 1 0 0
0 . . . 3 5 0 0
0 . . . 3 5 0 0
0 . . . 9 9
Turns the Effect on and off.
Determines the type of delay. Type 1 is a mono delay, Types 2 through 4 are two tap mono delays, and
Types 5 through 7 are two tap stereo delays (see chart below for further information).
Left Output: Right Output:
Delay 1 Delay 1
Delays 1 & 2 Delays 1 & 2
Delays 1 & 2 Delays 1 & 2
Delays 1 & 2 Delays 1 & 2
Delay 1 Delay 2
Delay 1 Delay 2
Delay 1 Delay 2
Controls the level of the delay in both Delay1 and Delay 2. Ranges from 0 to 100.
The available delay time ranges are 0 (no delay) to 3.5 seconds.
The amount of time it takes for the Reverb to fade to inaudibility. Ranges from 0 to 99.
RP-7 Valve
Feedback Source:
Delay 1
Delay 1
Delay 2
Delays 1 & 2
Delay 1
Delay 2
Delays 1 & 2
User Guide