Procedures
Procedures
RESET PROGRAM (20h)
SYS_HEAD, 20(h), F7(h)
The Reset Program procedure causes the Studio Quad or Studio 400 to reload the current saved pro-
gram.
RESET DEVICE (21h)
SYS_HEAD, 21(h), F7(h)
The Reset Device procedure causes the Studio Quad or Studio 400 to reboot the software as if the power
had been turned off, and then back on. If edits have been made to the current program without saving,
they will be lost.
RESET FACTORY SETTINGS (22h)
SYS_HEAD, 22(h), F7(h)
The Reset Factory Settings procedure causes the Studio Quad or Studio 400 to reload a sections of the
EPROM factory defaults and perform a hard reset.
10
10
DigiTech Studio Quad & 400 SysEx
DigiTech Studio Quad & 400 SysEx