Procedures; Request One Program (01H); Receive One Program (42H); Request Bulk Dump (49H) - DigiTech QUAD 400 SYSEX1.0 Manual

Midi system exclusive documentation
Table of Contents

Advertisement

In the following section, SYS_HEAD refers to a valid System Exclusive header. The System Exclusive header
starts with the System Exclusive status byte, and includes all bytes through the DigiTech device type. F7(h) is the
System Exclusive 'Message End' byte. All SysEx numbers in the format definition of each procedure are given as
hexadecimal values, along with this symbol (h) for clarification. Binary numbers are identified with this symbol
(b).

REQUEST ONE PROGRAM (01h)

SYS_HEAD, 01(h), yy
When yy = 00(h) . . . . . .User bank is selected
When yy = 01(h) . . . . . .Factory bank is selected
zz . . . . . . . . . . . . . . . . . .The Program number, 1-100 User (00-63(h)) or 1-191 Factory (00-BE(h))
When a Request One Program procedure is received, the Studio Quad or Studio 400 will respond with a
Receive One Program procedure.

RECEIVE ONE PROGRAM (42h)

SYS_HEAD 42(h), vv(1)
F7(h)
vv . . . . . . . . . . . . . . . . . .software version number
When yy = 00(h)
When yy = 01(h) . . . . . . Factory bank is selected
zz . . . . . . . . . . . . . . . . . .The Program number, 1-100 (00-63h)
dd(n) . . . . . . . . . . . . . . . Program data
The Receive One Program procedure is used to load a program into the Studio Quad or Studio 400.
The number of program bytes to be received (n) is different for each program. If the Studio Quad is sent
a Receive One Program procedure where the program number is not a valid RAM destination, it will be
ignored. For an example of the Studio Quad or Studio 400 Program Dump format, please see Misc
Information (page 11).

REQUEST BULK DUMP (49h)

SYS_HEAD, 49(h), F7(h)
When a Request Bulk Dump procedure is received, the Studio Quad or Studio 400 will respond with a
Receive Bulk Dump procedure.
DigiTech Studio Quad & 400 SysEx
Digitech Studio Quad & 400 SysEx
, yy
, zz
, zz
F7(h)
1
2
1
2
, vv(1)
, vv(2)
, vv(2)
1
2
1
. . . . .User bank is selected
, yy
, yy
, zz
, zz
, dd(1
)
,dd(1
2
1
2
1
2
st
1

Procedures

Procedures
)
, ... dd(n
)
, dd(n
)
,
st
2
th
1
th
2
5
5

Advertisement

Table of Contents
loading

This manual is also suitable for:

Studio 400Studio quad

Table of Contents