Lorex W891UA Series Manual

4k dual-lens wi-fi security camera

Hide thumbs Also See for W891UA Series:

Download this manual

W891UA Series - 4K Dual-Lens Wi-Fi Security Camera:

Smart Security Lighting

help.lorextechnology.com/link/portal/57356/57366/Article/3811/w891ua-4k-dual-lens-wi-fi-security-camera-smart-

security-lighting

The following article offers instructions for using the Smart Security Lighting feature on your

camera (W891UA) through the Lorex app.

Vertically positioned on the camera's front, between the dual-lenses, the Smart Security

Lighting displays a spectrum of up to 16 million colors. You can customize its lighting modes

or set it to activate when motion is detected.

Activate Smart Security Lighting on Smart Detection

1. Launch the Lorex app and tap

2. Tap Light Settings.

3. Tap Activate Light on Smart Motion

4. Tap on the type of smart detection you are using.

5. Tap

to enable Smart Security Lighting.

6. Adjust the Smart Security Lighting settings:

above the camera's thumbnail.

1/4

Need help?

Do you have a question about the W891UA Series and is the answer not in the manual?

Page 1 W891UA Series - 4K Dual-Lens Wi-Fi Security Camera: Smart Security Lighting help.lorextechnology.com/link/portal/57356/57366/Article/3811/w891ua-4k-dual-lens-wi-fi-security-camera-smart- security-lighting The following article offers instructions for using the Smart Security Lighting feature on your camera (W891UA) through the Lorex app. Vertically positioned on the camera's front, between the dual-lenses, the Smart Security Lighting displays a spectrum of up to 16 million colors.
Page 2 Light color: Tap to open the color settings. Select a color or tap on the rainbow color wheel to swipe through for a custom color. Tap Save. Deterrence light mode: Select Solid for a solid light or Flashing for a flashing light. Tap Save.
Page 3 Smart Security Lighting Modes 1. Launch the Lorex app and tap above the camera's thumbnail. 2. Tap Light Settings. 3. Tap Smart Security Lighting Modes. 4. Select one the Smart Security Lighting Mode options, and then tap Set. For a Custom Mode 1.
Page 4 Sun / Mon / Tue / Wed / Thu / Fri / Sat: Select a weekday. 12:00 AM-11:59 PM: Set the start and end time. Light color: Tap to open the color settings. Select a color or tap on the rainbow color wheel to swipe through for a custom color.

W891uad-e