Lorex W891UA Series Installation

W891UA Series - 4K Dual-Lens Wi-Fi Security Camera:
Installation
help.lorextechnology.com/link/portal/57356/57366/Article/3810/w891ua-4k-dual-lens-wi-fi-security-camera-installation
This article offers step-by-step instructions for camera installation.
App Setup
1. Download the Lorex app from the App Store or Google Play Store.
2. Launch the app and create an account, or login.
3. Connect your camera's cable to the Power Adapter and plug into a nearby outlet.
4. Tap the add (+) icon to connect your camera.
5. Scan your camera's (W891UA) Device QR code. The QR Code is located on the
bottom of your camera.
6. Follow the in-app instructions to complete setup.
Camera Placement
Place your camera in a wide, open space, and avoid placing it near any obstructions.
Place your camera at the central point of the area you wish to monitor.
Point your camera where there is the least amount of obstructions (i.e. tree branches).
Install your camera in a location that is difficult for thieves and vandals to reach.
Secure cabling so that it is not exposed or easily cut.
Other recommendations:
Place the camera close to your Wi-Fi router as possible.
Reduce the number of obstructive materials between the camera and the router or
access point.
When mounting your camera on a wall, make sure of the following:
Location: Place your camera in a wide, open space, and avoid placing it near any
obstructions.
Height: Install your camera at a height of 10 feet (3 meters) above the ground.
Angle: Angle your camera to face outwards between 15-30°.
Distance: Position your camera 22-65 feet (7-20 meters) within points of interest.
1/4