Advertisement
Quick Links
2K Wired Floodlight: Frequently Asked Questions
help.lorextechnology.com/link/portal/57356/57366/Article/3752/w452as-2k-wired-floodlight-camera-frequently-
asked-questions
The following frequently asked questions (FAQs) answer many questions about the Lorex
2K Wired Floodlight camera (W452AS Series).
How to install the floodlight camera?
You can install the floodlight camera using the existing wiring of your outdoor light. If you
are installing the floodlight camera to an area where there is no existing wiring, we highly
recommend that you consult with a licensed electrician.
For detailed instructions on installation, please check our installation article here.
Is the floodlight camera safe for outdoor installation?
Yes.
The floodlight camera is rated IP65 and safe for outdoor installation. It can withstand wet
and dry conditions.
If I connect the floodlight camera to a light switch, can I use the
switch to turn the lights ON/OFF?
You cannot connect to a light switch or dimmer as the camera requires continous power.
Do I have to purchase a separate storage or cloud storage for my
recordings?
The floodlight camera comes with local storage as it includes a pre-installed with a 32 GB
microSD card. You can upgrade the storage for up to 256 GB.
What is the maximum storage capacity of the floodlight camera?
The floodlight camera can accommodate up to 256 GB.
What are the compatible SD cards and their recording times?
The following is a complete of list of compatible SD cards and their recording times.
1/6
Advertisement
Related Manuals for Lorex W452AS Series
Summary of Contents for Lorex W452AS Series
- Page 1 2K Wired Floodlight: Frequently Asked Questions help.lorextechnology.com/link/portal/57356/57366/Article/3752/w452as-2k-wired-floodlight-camera-frequently- asked-questions The following frequently asked questions (FAQs) answer many questions about the Lorex 2K Wired Floodlight camera (W452AS Series). How to install the floodlight camera? You can install the floodlight camera using the existing wiring of your outdoor light. If you are installing the floodlight camera to an area where there is no existing wiring, we highly recommend that you consult with a licensed electrician.
-
Page 2: Compatible Sd Cards
Wired Floodlight: Lorex App - Light Settings. How to download or transfer recordings from the floodlight to other devices? There are two ways of backing up your recordings (1) through the Lorex App and (2) by manually removing the sd card from the device. - Page 3 How to configure motion detection? 1. Launch the Lorex App. 2. Tap icon above the channel thumbnail on the Devices screen. 3. Tap Motion Detection Settings. For detailed instructions on how to back up your recordings, please check this article.
- Page 4 If it is out of warranty, you will need to buy a new floodlight. Can I adjust the floodlights brightness? Yes. 1. Launch the Lorex App. 2. Tap icon above the channel thumbnail on the Devices screen.
- Page 5 By default, floodlight is set to remain off during the daytime, when it is not needed. How to reset the floodlight camera? Lift the protective cover over the Reset button. Press and hold the Reset button until you hear the audio prompts. Does floodlight camera work with WPA3 router? At this time, our hardware does not support connecting to a WPA3 router.
- Page 6 Yes. The storage for the floodlight camera can be upgraded up to 256 GB. How to setup Continuous Recording Schedule? 1. Lauch the Lorex App. 2. From the Devices screen, tap icon to configure device settings. 3. Tap Local Storage.
Need help?
Do you have a question about the W452AS Series and is the answer not in the manual?
Questions and answers