Advertisement
Quick Links
W462AQC : 2K Pan-Tilt Indoor Wi-Fi Security Camera -
Frequently Asked Questions
help.lorextechnology.com/link/portal/57356/57366/Article/3628/w462aqc-hd-wi-fi-camera-frequently-asked-
questions
The following FAQ article answers many of the general questions about the 2K Pan-Tilt
Indoor Wi-Fi Security Camera (W462AQC). Where applicable, the FAQ includes links to
articles where you may find more information.
What are the compatible SD cards?
Refer to Compatible SD Cards and Storage Sizes for more information.
Where do I place my Lorex Pan-Tilt Security Camera?
Place the camera close to your Wi-Fi router as possible.
Reduce the number of obstructive materials between the camera and the router or
access point.
Other electronic devices such as microwaves, TVs, cordless phones, and baby
monitors can cause signal interference. It is recommended to install the camera as
far away from these devices as possible.
How to adjust the field of view of the camera?
1. Launch the Lorex App.
2. From the Devices screen, tap a device thumbnail to start live view for a single
camera.
3. Tap
icon to adjust the field of view up and down or left and right.
For more instructions on live viewing feature, see Configuring Live View.
How to take a snapshot of live recording?
1. Launch the Lorex App.
2. From the Devices screen, tap a device thumbnail to start live view for a single
camera.
3. Tap Snapshot.
1/6
Advertisement
Related Manuals for Lorex W462AQC
Summary of Contents for Lorex W462AQC
- Page 1 The following FAQ article answers many of the general questions about the 2K Pan-Tilt Indoor Wi-Fi Security Camera (W462AQC). Where applicable, the FAQ includes links to articles where you may find more information. What are the compatible SD cards? Refer to Compatible SD Cards and Storage Sizes for more information.
- Page 2 Note: Privacy setting has to be disabled for taking snapshots. How to record a live video? 1. Launch the Lorex App. 2. From the Devices screen, tap a device thumbnail to start live view for a single camera. 3. Tap Record Video.
- Page 3 For full instructions on how to set customized Motion Zones™, see Configuring Motion Zones™. How to enable Smart Track? 1. Launch the Lorex App. 2. Tap icon above the channel thumbnail on the Devices screen. 3. Tap Motion Detection Settings.
- Page 4 4. Choose from the list of available Wi-Fi networks. 5. Enter password for the updated Wi-Fi network, then tap Save. Note: Enter the correct Wi-Fi password, otherwise your Lorex device will not be connected to the Wi-Fi. How to change Time Zone? 1.
- Page 5 By default, the video quality is set to High (2x1080p HD). What is Home & Away™? Lorex App can automatically use your location to manage your notifications when you are at home or away. The app will notify you when you are inside/outside of your set home perimeter.
- Page 6 How do I remove the HD Wi-Fi Camera from my account? 1. Launch the Lorex App. 2. From the Devices screen, tap icon to configure device settings. 3. Tap Remove Device. How to enable privacy mode? 1. Launch the Lorex App.
Need help?
Do you have a question about the W462AQC and is the answer not in the manual?
Questions and answers