KOORUI 15B1 Connection Manual

Connection Method 1 ：
1. When your device only has a Type-C interface, we recommend that you use connection method 1.
2. As shown in the picture, first you connect the Type-C cable in the accessories to your device, and then press and hold the power button for 5 seconds. If it is
work, you will find that the initial brightness of the monitor is 50%, if it is adjusted to 100%, please be sure to add an extra Type-C cable and a wall charger to
power the monitor.
3. If the monitor does not display, please contact us.
Connection Method 2 ：
1. When your device only has HDMI interface, we recommend that you use connection method 2.
2. As shown in the figure, two cables are required to connect using the HDMI interface. First of all, please use the HDMI cable included in the accessories to
connect your device. At this time, the monitor cannot be worked normally. Be sure to use the Type-C cable and wall charger to power the monitor. Finally, press
and hold the power button for 5 seconds.
3. If the monitor does not display, please contact us.