Top Panel - DigiTech CONTROL 2 Owner's Manual

Top Panel

Top Panel
1
9
1. Bank Down / Bank Up
Press either of these footswitches to scroll through banks (groups) of Factory and
User presets. When either of these footswitches are pressed, the Display shows
the presets contained in each bank, and the preset footswitches will flash (1-5
in 5 Patch mode and 1-10 in 10 Patch mode). Press a footswitch with a flashing
LED to select a preset in the bank. If no preset is selected after 5 seconds (or if a
footswitch with an unlit LED is pressed), you are returned to your current preset.
2. Display
Displays bank names, preset names, effect on/off status, tuner information, and
expression pedal calibration information.
3. Factory LED
Lights when a Factory preset or bank is selected.
4. Wah LED
Lights when the Wah effect is activated.
5. Expression Pedal
The built-in Expression Pedal provides real time control over parameters in your
presets. You can assign the Expression Pedal to almost any parameter, giving you
the option to control how fast a Chorus or Rotary effect oscillates, how much gain
your amp model has, how loud the delays are, and many more. See page 11 for
more information about how to assign parameters to the Expression Pedal. Refer
to your GSP owner's manual for a list of available presets.
2
Control 2 Owner's Manual
2
8
3 4
7
5
6