In no event shall DigiTech or its dealers be liable for special or consequential damages or from any delay in the per- formance of this warranty due to causes beyond their control.
After you've had time to familiarize yourself with the unit, try experimenting with unusual continuous con- troller Parameter links. You may get some interesting results. DigiTech is always looking for new ideas, so if you feel that you’ve created something unique, send us your ideas at the address on the back cover of this man- ual.
Section 1 - Startup Section 1 - Startup Front Panel Controls and Functions The front panel of the Control One consists of a 20 character vacuum-fluorescent display, ten programmable footswitches, a dedicated bypass footswitch, a Select switch, and the built-in continuous controller pedal. •...
Section 2 - Basic Operation • Control Output - The Control Output is a 5-pin DIN connector (MIDI-type). All control information gen- erated by the Control One is sent out the Control Output to the 2112 SGS, GSP-2101, Valve FX or Legend II.
Section 3 - Programming the Control One Section 3 - Programming the Control One All programming and setup for the Control One is performed from the front panel of the 2112 SGS, GSP-2101, Valve FX or Legend II. Most of the setup menus that deal with the Control One can be found in the Foot Controller section of the Utility setup menu.