Advertisement
Quick Links
SIDEBOARD CABINET WITH DRAWERS
Carefully review assembly and care instructions before using this product. Save this document for future reference.
Assemble components on a soft, clean surface to avoid scratching or damaging the finish.
Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.
Save the packing slip.
HELPFUL HINTS
Sunnydaze Decor advises reviewing this manual fully, and assembling the unit soon after purchase.
Check that all parts are accounted for and familiarize yourself with the assembly before beginning.
CR915
Purchase Date:
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
customerservice@sunnydazedecor.com, or via our contact us page at
AGR-416
SAVE THIS MANUAL FOR FUTURE REFERENCE.
/
/
Order/Customer Reference Number:
2-PERSON
ASSEMBLY
RECOMMENDED
01/2023
https://tiny.cc/SunnydazeWarranty
https://tiny.cc/SunnydazeContact
SCAN THIS CODE
WITH YOUR
SMARTPHONE
TO VIEW OUR
ASSEMBLY VIDEO
Page 1 / 14
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Sunnydaze Decor AGR-416
Summary of Contents for Sunnydaze Decor AGR-416
- Page 1 Order/Customer Reference Number: Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell. Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with the date of purchase as well as photos of the merchandise defect, must be provided.
- Page 2 INTRODUCTION Read the manual carefully to ensure you fully understand all use, care, assembly, and safety information. Assemble on a soft, flat, clean, and Read this manual carefully and dry surface. follow the assembly instructions in the order listed. Pay close Use a soft, protective barrier when attention to assembly drawings.
-
Page 3: Tools Required
COMPONENTS Seq. Part Name Qty. Left Side Panel Right Side Panel Bottom Panel Shelf Bottom Frame Center Face Frame Top Face Frame Vertical Cabinet Face Frame Drawer Side (L/R) Outside Drawer Rail (L/R) Center Drawer Rail Center Drawer Rail Support Side Trim Board (L/R) Front Trim Board Backing Board... - Page 4 ASSEMBLY Carefully review all steps and fully understand assembly before beginning. IMPORTANT: Take care not to over-tighten screws as doing so may crack the wood or strip the screw hole, causing a weak connection and reduced stability. STEP 1 TIP: Install connectors and shelf pins by gently tapping 02: 1 them into the designated holes using a rubber mallet.
- Page 5 STEP 3 06: 1 07: 1 08: 1 09: 1 11: 2 12: 1 13: 1 25: 1 A: 30 Install four Wood Dowels (A) into Bottom Frame (06), Center Face Frame (07), Top Face Frame (08), Vertical Cabinet Face Frame (09), Center Drawer Rail (12), and Vertical Drawer Face Frame (25). Install two Wood Dowels (A) into two Outside Drawer Rails (11), Center Drawer Rail Support (13), and Vertical Drawer Face Frame (25).
- Page 6 STEP 5 IMPORTANT: Ensure all components are installed in the correct direction, D: 4 as indicated in the diagrams. With the angled mounting holes facing upward, lay Bottom Frame (06), Center Face Frame (07), Top Face Frame (08), Vertical Cabinet Face Frame (09), and Vertical Drawer Face Frame (25), as shown. NOTE: Vertical Drawer Face Frame (25) is marked with a + and - symbol to indicate there is a lesser and greater distance between the mounting holes and the edges.
- Page 7 STEP 7 Assistance is recommended for this step. B: 6 D: 6 Lay Side Panel (02) on a flat, clean surface. Ensuring the catches on Bottom Panel (04) face toward the top of the unit, align Bottom Panel (04) with the mounting holes on the bottom of the side panel.
- Page 8 STEP 9 Assistance is recommended for this step. 15: 1 B: 3 Align Front Trim Board (15) with the bottom, front of the unit. Have an assistant firmly hold the trim board in place to ensure it remains flush while hardware is secured. Secure the trim board to the bottom frame using three M4.5x28mm Pan Screws (B).
- Page 9 STEP 11 05: 1 Ensuring the finished edge faces the front of the cabinet, place Shelf (05) on the shelf pins. STEP 12 18: 1 C: 6 G: 1 K: 1 M: 2 O: 2 Back IMPORTANT: Note the direction of the mounting holes on the hinges and install as shown in the diagram. Do not fully secure Screws (C) until after the door is properly aligned in the next step.
- Page 10 STEP 13 19: 1 C: 6 G: 1 K: 1 M: 2 O: 2 IMPORTANT: Note the direction of the mounting holes on the hinges and install as shown in the diagram. Do not fully secure Screws (C) until after the door is properly aligned in the next step. Align two Hinges (M) with the indents on the front of Right Door (19) and mostly fasten using six M3.5x14mm Pan Screws (C).
- Page 11 STEP 15 P: 4 R: 12 IMPORTANT: The arrow on the drawer slide must point toward the front of the cabinet. Ensure the drawer slide remains centered on the drawer rail; if the slides are not centered, the drawer will be crooked. Push the front of one Drawer Slide (P) backward.
- Page 12 STEP 17 Q: 4 Extend the drawer slides out the front of the cabinet. Align the first small hole on the drawer slides with the pre-drilled hole on the front of the drawer sides. From the inside of the drawer, secure the drawer to the slide using one M4x8mm Bolt (Q) on each side, as shown. NOTE: The drawer sides have a second pre-drilled hole toward the back of the drawer, this hole is a result of the manufacturing process and is not intended for securing the drawer to the slide.
- Page 13 STEP 19 E: 8 For even spacing, carefully measure and install eight Tacks (E) as indicated above. HELPFUL MEASURING HACK To help ensure tacks are evenly spaced, we developed a hack to make this step easier. Grab a blank white piece of paper or tracing paper, a writing utensil, a ruler and scissors. The blocks below are sized to the dimensions noted in the above diagrams.
- Page 14 STEP 20 Y: 1 Wall WARNING: Check for pipes and electrical wiring before drilling. IMPORTANT: If walls are not solid like brick, stone or concrete, you will require special fittings (not included). When in doubt, consult a professional. Carefully measure the location of pilot hole before drilling and installing the unit. •...
Need help?
Do you have a question about the AGR-416 and is the answer not in the manual?
Questions and answers