Sunnydaze Decor AGR-331 Manual

Sunnydaze Decor AGR-331 Manual

Coffee table with drawer

Advertisement

Quick Links

COFFEE TABLE WITH DRAWER
Carefully review assembly and care instructions before using this product. Save this document for future reference.
Assemble components on a soft, clean surface to avoid scratching or damaging the finish.
Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.
Save the packing slip.

HELPFUL HINTS

Sunnydaze Decor advises reviewing this manual fully, and assembling the unit soon after purchase.
Check that all parts are accounted for and familiarize yourself with the assembly before beginning.
CL211
Purchase Date:
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
customerservice@sunnydazedecor.com, or via our contact us page at
AGR-331
2-PERSON
RECOMMENDED
SAVE THIS MANUAL FOR FUTURE REFERENCE.
/
/
Order/Customer Reference Number:
01/2023
https://tiny.cc/SunnydazeWarranty
https://tiny.cc/SunnydazeContact
SCAN THIS CODE
WITH YOUR
SMARTPHONE
TO VIEW OUR
ASSEMBLY VIDEO
Page 1 / 8

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AGR-331 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Sunnydaze Decor AGR-331

  • Page 1 Order/Customer Reference Number: Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell. Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with the date of purchase as well as photos of the merchandise defect, must be provided.
  • Page 2 INTRODUCTION Read the manual carefully to ensure you fully understand all use, care, assembly, and safety information. Assemble on a soft, flat, clean, and Read this manual carefully and dry surface. follow the assembly instructions in the order listed. Pay close Use a soft, protective barrier when attention to assembly drawings.
  • Page 3 COMPONENTS Inspect packaging to ensure all parts are accounted for before disposing of packing materials. Save the packing slip. 2-PERSON ASSEMBLY RECOMMENDED Seq. Part Name Qty. Tabletop Hardware Qty. Side Panel (L/R) Wood Dowel M4.5x28mm Pan Screw Back Panel M3.5x30mm Flat Screw Front Panel Tack Drawer Rail...
  • Page 4 ASSEMBLY Carefully review all steps and fully understand assembly before beginning. IMPORTANT: Take care not to over-tighten screws as doing so may crack the wood or strip the screw hole, causing a weak connection and reduced stability. STEP 1 02: 2 TIP: Install connectors by gently tapping 04: 1 them into the designated hole using a...
  • Page 5 STEP 2 03: 4 B: 8 IMPORTANT: Note the direction of the pre-drilled holes on the legs. Ensure the holes for mounting the front/back panel are upward as indicated in the diagram. Align two Legs (03) with Side Panel (02) and secure using four M4.5x28mm Pan Screws (B).
  • Page 6 STEP 4 H: 6 J: 2 IMPORTANT: The arrow on the drawer slide must face the front of the unit. Ensure the drawer slide remains centered on the drawer rail; if the slides are not centered, the drawer will be crooked. Push the front of one Drawer Slide (J) backward.
  • Page 7 STEP 6 01: 1 G: 10 Place Top (01) on a flat, clean surface. Align the assembled components with the top and secure using ten M4.5x25mm Pan Screws (G). STEP 7 07: 2 08: 1 09: 1 10: 1 C: 8 E: 1 Ensuring the inside grooves align, secure two Drawer Sides (07) to Drawer Face (08) using four M3.5x30mm Flat Screws (C).
  • Page 8 STEP 8 D: 16 K: 2 Extend the drawer slides out the front of the cabinet. Align the first small hole on the drawer slides with the pre- drilled hole on the front of the drawer sides. From the inside of the drawer, secure the drawer to the slide using one M4x8mm Bolt (K) on each side, as shown.

Table of Contents