Advertisement
Quick Links
SIDEBOARD CABINET WITH DRAWERS
Carefully review assembly and care instructions before using this product. Save this document for future reference.
Assemble components on a soft, clean surface to avoid scratching or damaging the finish.
HELPFUL HINTS
Sunnydaze Decor advises reviewing this manual fully, and assembling the unit soon after purchase.
Check that all parts are accounted for and familiarize yourself with the assembly before beginning.
CR915
Purchase Date:
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
customerservice@sunnydazedecor.com, or via our contact us page at
AGR-416
SAVE THIS MANUAL FOR FUTURE REFERENCE.
/
/
Order/Customer Reference Number:
08/2022
https://tiny.cc/SunnydazeWarranty
https://tiny.cc/SunnydazeContact
2-PERSON
ASSEMBLY
RECOMMENDED
Page 1 / 11
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Sunnydaze Decor AGR-416
Summary of Contents for Sunnydaze Decor AGR-416
- Page 1 Order/Customer Reference Number: Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell. Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with the date of purchase as well as photos of the merchandise defect, must be provided.
- Page 2 INTRODUCTION Read the manual carefully to ensure you fully understand all use, care, assembly, and safety information. Assemble on a soft, flat, clean, and Read this manual carefully and dry surface. follow the assembly instructions in the order listed. Pay close Use a soft, protective barrier when attention to assembly drawings.
- Page 3 COMPONENTS Seq. Part Name Qty. Left Side Panel Right Side Panel Bottom Panel Shelf Bottom Frame Center Face Frame Top Face Frame Vertical Cabinet Face Frame Drawer Side (L/R) Outside Drawer Rail (L/R) Center Drawer Rail Center Drawer Rail Support Side Trim Board (L/R) Front Trim Board Backing Board...
- Page 4 ASSEMBLY Carefully review all steps and fully understand assembly before beginning. IMPORTANT: Take care not to over-tighten screws as doing so may crack the wood or strip the screw hole, causing a weak connection and reduced stability. STEP 1 02: 1 03: 1 04: 1 A: 14...
- Page 5 STEP 3 IMPORTANT: Ensure the stiles are installed in the correct 23: 1 direction, as indicated in the diagrams. 24: 1 B: 6 STEP 4 D: 4 IMPORTANT: Ensure the mounting holes of all components are as indicated by the diagram. STEP 5 IMPORTANT: Ensure the rail support is installed in the correct direction,...
- Page 6 STEP 6 B: 6 D: 6 STEP 7 01: 1 14: 2 B: 4 STEP 8 15: 1 B: 3 CR915 08/2022 Page 6 / 11...
- Page 7 STEP 9 B: 8 IMPORTANT: Ensure the drawer rails are installed in the correct direction, as indicated in the diagram. STEP 10 05: 1 STEP 11 IMPORTANT: Note the direction of the hinge mounting holes 18: 1 and install as shown in the diagram. C: 6 Do not fully secure Screws (C) until after the door is properly aligned in Step 13.
- Page 8 STEP 12 19: 1 C: 6 G: 1 K: 1 M: 2 O: 2 Back IMPORTANT: Front Note the direction of the hinge mounting holes and install as shown in the diagram. Do not fully secure Screws (C) until after the door is properly aligned in the next step.
- Page 9 STEP 14 10: 4 20: 2 21: 2 22: 2 G: 2 STEP 15 P: 4 R: 12 STEP 16 Q: 4 CR915 08/2022 Page 9 / 11...
- Page 10 STEP 17 16: 2 17: 1 STEP 18 Wall WARNING: Check for pipes and electrical wiring before drilling. IMPORTANT: If walls are not solid like brick, stone or concrete, you will require special fittings (not included). When in doubt, consult a professional. Carefully measure the location of pilot hole before drilling and installing the unit.
- Page 11 SAFETY STATEMENTS & WARNINGS • Residential use only. Not for commercial or industrial use. • For indoor use only. • Ensure fittings are tight before use. Periodically check fitting to ensure they are tight. • Only use this unit on a flat, level surface. •...
Need help?
Do you have a question about the AGR-416 and is the answer not in the manual?
Questions and answers