Asus TA-55 User Manual page 2

Standard Model Standard Model Standard Model Standard Model Standard Model
Installing the power supply unit (PSU) Installing the power supply unit (PSU) Installing the power supply unit (PSU)
Installing the power supply unit (PSU) Installing the power supply unit (PSU)
2 2 2 2 2
1 1 1 1 1
Slide the PSU into the slot
Locate the PSU slot.
until it snugly fits the
metal rail.
3 3 3 3 3
Secure with screws.
Installing a floppy disk drive (FDD) Installing a floppy disk drive (FDD)
Installing a floppy disk drive (FDD) Installing a floppy disk drive (FDD) Installing a floppy disk drive (FDD)
1 1 1 1 1 2 2 2 2 2
Using a screwdriver, push Insert the FDD into the
the knock-down metal bay. Make sure the FDD
cover in and out of the
holes align with the
chassis until it is removed. chassis holes.
3 3 3 3 3 4 4 4 4 4
Secure the FDD with Release the lock tabs on the
screws. front bezel to disengage the
drive cover.
T A / T M 5 S e r i e s T A / T M 5 S e r i e s T A / T M 5 S e r i e s T A / T M 5 S e r i e s T A / T M 5 S e r i e s
Removing the side covers and front bezel Removing the side covers and front bezel Removing the side covers and front bezel
Removing the side covers and front bezel Removing the side covers and front bezel
1 1 1 1 1 2 2 2 2 2
Remove the screws on Push the side cover towards
the rear panel. the rear panel.
Repeat steps 1 and 2 to
remove the other side cover
Installing an optical disk drive (ODD) Installing an optical disk drive (ODD) Installing an optical disk drive (ODD)
Installing an optical disk drive (ODD) Installing an optical disk drive (ODD)
1 1 1 1 1 2 2 2 2 2
Insert the ODD into the Align the ODD holes with
bay. the bay holes, then secure
the ODD with screws on
both sides of the bay.
3 3 3 3 3
Release the lock tabs on
the front bezel to
disengage the drive cover.
Installing an expansion card Installing an expansion card Installing an expansion card Installing an expansion card Installing an expansion card
1 1 1 1 1
2 2 2 2 2
Remove the screws
Choose the slot you want to
securing the use. Remove the metal cover
bracket to the
on the rear panel.
chassis. Remove
the expansion slot
bracket.
4 4 4 4 4
3 3 3 3 3
Replace the expansion slot
Lay the chassis on a flat,
bracket and secure it with
stable surface. Align the
card connector with the the screws you removed
earlier.
slot, then press firmly
until the card is
completely seated on the
slot.
3 3 3 3 3 4 4 4 4 4
Release the side Swing the front bezel in the
tabs that secure direction of the arrow.
the front bezel to
Unhook the hinge-like tabs. Set the
the chassis.
front bezel aside.
Installing a hard disk drive (HDD) Installing a hard disk drive (HDD) Installing a hard disk drive (HDD)
Installing a hard disk drive (HDD) Installing a hard disk drive (HDD)
1 1 1 1 1
2 2 2 2 2
1.
3 3 3 3 3
2.
3.
Reinstalling the side cover and front bezel Reinstalling the side cover and front bezel Reinstalling the side cover and front bezel Reinstalling the side cover and front bezel Reinstalling the side cover and front bezel
Hook the
1 1 1 1 1
hinge-like tabs to
the holes on the
chassis. Swing the
front bezel in the
direction of the
arrow and push to
secure the front
bezel to the
chassis.
2 2 2 2 2
Push the side cover towards Drive screws on the
the front bezel. rear panel.
Insert the HDD into
the bay.
Align the HDD hole
with the bay hole.
Secure the HDD with
a screw on both
sides of the bay.
3 3 3 3 3