Garmin iQue 3600 - Palm OS 5.0 150 MHz Application Manual page 61

To Set the Alarm:
1. With QueClock displayed, tap the fi eld under the Alarm title to
display the "Set Alarm" page.
2. The alarm set is either blank or set to a time you have previously
set. To set it to the desired time, fi rst tap the hour in the fi rst
column and then the minutes (in increments of 5 minutes) from the
second column.
3. Tap OK to set the alarm and return to the clock page. Observe
the alarm set time in the fi eld below the Alarm title. (If you set an
alarm time that has already expired, the alarm will be set for the
following day.)
4. Next, select the frequency for which the alarm will be repeated.
Tap the Field to the right of the Alarm Time, defi ned as "Once"
to choose from Once, Daily (a full seven day week) or Monday
through Friday).
5. Finally, select the desired alarm tone by tapping the fi eld next to
the Alarm Sound title to choose from several options.
6. Tap OK to exit the application. When the set alarm time arrives
the alarm will sound and the "Reminder" page will appear. Tap
OK to acknowledge and close, Snooze to reset the alarm for 5
minutes later, or GoTo to return the Clock Application.
You are currently limited to only one alarm time for a twenty-four
hour period. If you desire multiple alarms in one day, use the Date
Book Application to list them as appointments.
iQue 3600
Time Applications
Using QueClock
Clock
Display
with Alarm
Set Options
Alarm Time Set
Alarm Reminder
51