Stopping And Resuming Route Navigation; Customizing A Route - Garmin iQue 3600 - Palm OS 5.0 150 MHz Application Manual

iQue 3600
GPS Applications
Using QueRoutes
Route Options Menu when a Route has
been stopped before completion
Via Points List and Options Menu
36

Stopping and Resuming Route Navigation

You can stop navigating a route at any time.
To Stop or Resume Navigating a Route:
1. Tap the Route icon to display the Routes dialog box.
2. Tap the Stop Navigation icon to remove the route overlay from
the Map Page. This also stops voice prompts and turn preview
pages. Start navigating again by tapping the Resume Navigation
icon from the QueRoutes dialog box.

Customizing a Route

You are not limited to using a newly created route as is, you can
modify it to meet your own requirements. To alter a route to include
various points on the way, you can use "Edit Vias" to place them.
To add or change route "Vias":
1. While a route is active, tap the Route icon to display the
QueRoutes dialog box.
2. Tap the Edit Vias icon to display the Edit Vias page.
3. Select the method of adding a via point from the two options
shown at the bottom of the page. "From Find" displays the
QueFind application. "From Map" displays the QueMap application.
4. Use the same method to select a via point as you would a destination.
The selected location now becomes a point along your current route.
5. You can move the selected via point anywhere in the list by tapping
the Up/Down arrows. The "Determine Best Order" option will
arrange the vias in the most effi cient order for routing.