Measure Distance - Garmin iQue 3600 - Palm OS 5.0 150 MHz Application Manual

Using Measure Distance
Use Measure Distance to:
• Measure the distance from your current location to a point on the
map.
• Determine the distance between two selected points on the map.
To measure distance on the map:
1. Tap Measure Distance from the QueMap Menu Que options
list to display the Measure Distance Page. The map displays at a
scale of 30 miles. Use the Map Scale Selector, the Pan Map or View
Area tool to adjust the map to include the map points you want to
measure.
2. To measure the distance from your current location to a map point,
tap the point with the stylus to mark the point. Read the distance
in the fi eld below the map. If you want to create a route to the
map point, tap the QueRoutes icon on the tool bar and follow
instructions on page 33. Note that the route distance may be
somewhat greater because the distance was measured in a direct
line and routes typically follow roads.
3. To measure the distance between two points on the map, fi rst, tap
the desired point on the map, then tap the Map Pin icon
the tool bar to move the Map Pin to that point. Next, tap the map
point you want to measure to and observe the measurement in the
fi eld below the map. Tapping the QueRoutes icon will not create a
route between the two points.
4. When fi nished measuring distance, tap the Done button to close.
iQue 3600
GPS Applications
Using QueMap
Measure Distance Page
on
Map Pin
Measuring between two map points
Distance
Measured
13